Workshop metalwork wall

This project is to create a dividing wall between the metalworking area and the CNC / Laser cutting area.

This will keep welding and grinding dust out of the more delicate equipment in the workshop.

Plan

Tom created these drawings, showing the construction of the wall using 3" x 2" studding timeber, 12mm plywood and polycarbonate glazing.

Bill of materials

The following are to be delivered to the Hackspace on monday afternoon, 17/2/2014

20 2.4m lengths of 3" x 2" CLS studding timber 6 3.0m lengths of 3" x 2" planed timber (actually slightly smaller then the CLS, buy will do) 4 sheets of 12mm softwood plywood

Polycarbonate sheeting for glazing will be ordered once the size of the 'windows' are known.