DIY Laser

From Nottinghack Wiki
Jump to navigation Jump to search

Note: This project was stopped in January 2013. See the Laser Cutter page for further information.

In November 2012, Nottinghack members ran a pledge drive to fund the building of a new, larger, laser cutter. With a goal of £1000, we raised £2000 in 48 hours! Now the plan to to build and even bigger, more powerful, more awesome laser cutter!

These pages will chart the design, build, setup and use of this laser.

In the Beginning

The pledge was started on 13th November 2012, but the monies won't be called in until we have finalised a design for the cutter and have a build plan in place.

The first design meeting was on Wednesday 21st November 2012 at 8pm in the Blue Room and was well attended.

The Design

The blackhole laser by iGull

We can split the design into two major sections - essentials and addons.

  • Essentials are those features or design elements that will be built as we put the laser together for the first time. They may or may not be actually essential to the running of the device, but as a group we consider them essential to our laser
  • Addons are all the nice to have features that we will document and look to build after we have a functioning laser cutter.

The main design restriction is the size of the cutting area - this will be 800x450mm

The design is going to be based upon the build log open source design and more specifically the 'Black Hole' laser cutter made by iGull, the details can be found here. http://www.buildlog.net/forum/viewtopic.php?f=16&t=751

SubSystems

Additional Essentials

Addons

Possibles

The Team

Below is a list of everyone that will be working on the laser. For some people I just have a first name, please fill in any missing details of yours!

Name Interest Sub Team Notes
Reprap Matt Anything
Kai Anything
Ian Anything
Andy Anything
Joe Brackets, etc
Martin Control
Edward Mac handicaps
Russell Mechanicals
Michael Mechanicals
Lionel Mechanicals
Steve Mechanicals, Control
James Project
Jake Project
Daniel RFID
Matt Little USB, Steppers, Anything
Wendy Anything Learn/Help
David Extraction, Mechanicals, Anything


Froggy Anything Handy with soldering iron.

Notes

If you need to make random notes for inclusion later on, use the Notepad.

Full Subpage List

Specifications

Size:

Laser power: Minimum 60W/Maximum 80W

  • Cutting

Speed:

X axis:

Y axis:

Resolution:

Precision:

Accuracy:

Repeatability: Yes

  • Etching

Speed:

Resolution:

Accuracy:

Precision:

Repeatability:

  • Available Gantry Specifications

Speed:

X axis: 1000mm/s

Y axis: 550mm/s