Hack the Space Days/8th-10th Feb 2019
We held a Hack the Space weekend from 18:00 on Friday 8th February to 18:00 Sunday 10th February (some jobs starting at 13:00). It was all hands on deck improving our space! This wiki page was intended to detail exactly what needed doing so that we were all working towards the same goals. Now that the weekend is over, this page shows what we were working on and our progress.
Many thanks to the many people who gave their time to make this a success.
- 1 Studio Flooring Replacement
- 2 Clearing the Large Project Storage Area
- 3 PAT Testing
- 4 Miscellaneous Jobs
- 5 CNC Area
Studio Flooring Replacement
As many are aware the studio flooring was in desperate need of replacement after many years of surviving. 2019 was time for new flooring. During this time we also reset LPS (Large Project Storage). Below are some of the jobs completed
|Studio Floor Replacement|
|Empty the Craft Room||Ongoing||N/A||Hairy Paul|
|Replacement of Craft Room Floor||
Session 1: 09/01/19 7pm.
Session 2: 15/01/19 7pm.
danspencer101, HS2.5 Task force
Session 1: Carpet removed, Vinyl Cut.
Session 2: Hard Board and Vinyl Laid.
|Move Sewing Machines and Embroidery Machine||Fri||Hairy Paul|| The machines are now in the new craft room
|Move Tables & Chairs to Workshop||Fri||Fri||Done (08/02/2019)|
|Move Vending Machines||Fri||Fri||Daniel||Done (08/02/2019)|
|Remove Bench to workshop||Fri||Fri||Done (08/02/2019)|
|Removal of Studio Floor||Fri / Sat (Morn)||Sat (AM)||Done (08/02/2019)|
|Prep floor for new flooring||Sat||Sat (PM)||
|Lay new flooring||Sat / Sun||Done (09/02/2019)|
|refix the door bars & make good.||Sun|
|Move Tables & Chairs back to workshop||Sun||Done (10/02/2019)|
|Move Vending Machines back||Sun||Done (10/02/2019)|
|Tidy and Drinks||Sun||Done (10/02/2019)|
Clearing the Large Project Storage Area
|Large Project Storage|
|Give notice of intentions to Hackspace members||03/01/2019||-||Sophie|| This was sent out in addition to Posters put up in the space
|Empty the main shelves, auditing projects as we go||Friday 8th, 1pm - 8pm||Friday 8th, 1pm - 8pm||Sophie, Jymbob||Done (08/02/19)|
|Empty the temporary sheet storage, auditing projects as we go||Friday 8th, 1pm - 8pm||Friday 8th, 1pm - 8pm||Sophie, Jymbob|
|Clear all corners and under tables of abandoned crap||Friday 8th, 1pm - 8pm||Friday 8th, 1pm - 8pm||Sophie, Jymbob||Done (08/02/19)|
|Move all abandoned projects into the closed off area of 2.5||Friday 8th, 1pm - 8pm||Friday 8th, 1pm - 8pm||Sophie, Jymbob||Done (08/02/19)|
The Large Project Storage has been cleared!
Thank you to all volunteers :)
"Active" projects have been moved to sheet storage over the weekend. All others have been moved to downstairs for a month.
Portable appliance testing needs to be carried out to bring us in line with safety regulations. This job started on Saturday. It is simple to do and needs no special skills beyond being able to properly use and read the test equipment. Demonstrations were available from James Adams or James Taylor of Safety Team and Trustee fame.
Contact: Team: Safety (Slack) - James Taylor
Many thanks to all those who participated in the PAT testing. Lots of appliances were tested and added to the relevant databases.
Fire Escape Signage
New fire escape signage has been hung around the hackspace.
Electrics within the workshop
Workshop lights were replaced
Washing the Lab Coats
Lab coats and overalls were taken home and given a good wash. Sparkly white now & fit for human habitation.
Move the Piano
The Piano was moved into the comfy area. The radiogram has not been moved.
Broken Toilet Seat
One of the toilet seats was broken.
There is a new shiny lid on the toilet now as this has been completed by some anonymous kind soul
The hot tap in the upstairs toilet is leaking. This could do with being looked at before it gets any worse by someone with plumbing skills.
Producing a Checklist of tools
Producing a list of tools is a task that can be worked on if you find yourself alone or you are working on PAT testing during the weekend, (see also Portable Appliance Testing Records at http://nhpat.ocatelle.xyz/login/). There is already a wiki page for this list that can be updated by anyone :)
The wiki page for the list is located here: Tool list
Dust shoe for CNC Mill
This is a low priority task that could be worked on if alone in the space during the shutdown. It will probably require some 3D Modelling skill.
The mill could potentially be fitted with a removable dust shoe that has an attachment for the hoover. Something that looks something like this: http://www.cncrouterparts.com/universal-cnc-dust-shoe-p-396.html
Tool Storage Rack
The collets and tools are currently sitting loose on the stepper controller under the CNC PC monitor. I would like to get some kind of tool rack made to better organise the area. The rack should include provision space for more tools to be added in the future.