View source for Resin Calibration Charts

A page to collate resin calibration charts for the [[AnyCubic Photon]] 3D printer.

It is possible to print a [https://github.com/altLab/photon-resin-calibration Calibration Chart] for a specific layer height with your resin to find a good starting point.

This process requires changing the printer's settings, printing one or more charts, and then restoring the previous settings. **Please make sure you are confident that you can restore the standard settings before starting this process.**

[[File:AnyCubic Translucent Green with 20 micron layers.jpg|thumb|AnyCubic Translucent Green with 20 micron layers]]

[[File:AnyCubic Translucent Green with 50 micron layers.jpg|thumb|AnyCubic Translucent Green with 50 micron layers]]

[[File:AnyCubic Orange with 20 micron layers.jpg|thumb|AnyCubic Orange with 20 micron layers]]

[[File:AnyCubic Orange with 50 micron layers.jpg|thumb|AnyCubic Orange with 50 micron layers]]

As an opaque resin the AnyCubic Orange appears to require a much longer cure time (20s at 20 microns) and is very sensitive to bed levelling.

Test cards for AnyCubic Translucent Yellow resin will be uploaded when I am back in the space to photograph them.

Currently the test cards are being kept near the printer for ease of reference.