View source for CNC Area

{{Location
|image=File:Location CNC Area.jpeg
|team=CNC
|use=Workshop area for CNC Machines
|floor=Upstairs
|floorplanimage=File:Floorplan - CNC Area.png
}}

The CNC Area is a workshop area populated with Computer Numerically Controlled (CNC) Tools. It is looked after by the [[Team:CNC|CNC team]]. The area is part of the upstairs workshop and next to the laser cutter.

==Tools and equipment==
[[File:WDenfordNovaturn.JPG|300px|thumbnail|right|[[Denford Lathe|Denford Novaturn]]]]
{{tools}} 
{{Paragraph Tool List}}

==Important notes==

Tools in this area can have a steep learning curve. Please don't hesitate to post on the Google Group or CNC Slack channels if you require assistance.

==Availability==
{{open}} This area does not require booking and can not be booked.

==Materials and consumables==

==Cleaning and maintenance==
{{photo|date=March 2019|reason=Photo of Clean Desk Standard}}
<!--[[File:CNC clean.JPG|thumb|Vac kept next to corridor wall.|220px]]-->
Always leave the area as you would like to find it. Build time into your schedule for cleaning up. It's important that this area must remain clean due to its close proximity to the [[Electronics Area]]. 

There is usually a hoover available in the CNC Area. If there is no hoover in the immediate vicinity check in the [[Workshop]]. 

Desks should be kept clear of debris.

Once a month the tools are checked and maintenance carried out as required.

==Problems and issues== 
{{quest}} If there is a problem in the CNC Area contact the [[Team:CNC|CNC team]] in the first instance. If a tool is broken or damaged report it to the relevant team listed on the Tool's wiki page.

==Tasks that currently need doing==
*[[CNC Tool Storage]]

==Light Control==
[[File:Workshop Close Switch.jpeg|250px]]]

<!-- no sub location of CNC Area defined, so currently no need for category
{{Paragraph Sub Location}} -->


{{Location List|category=Computer aided manufacture}}

[[Category:Location]]
[[Category:Computer aided manufacture]]