SLA Printer Pledge: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
No edit summary
Line 43: Line 43:
==Further Details==
==Further Details==


For discussion see #General and #3DPrinting (Slack)
For discussion see:
* [https://nottinghack.slack.com/messages/C0A92QZQW/ #3DPrinting (Slack)]
* [https://nottinghack.slack.com/messages/C0A8ZJK3J/ #General (Slack)]
* [https://groups.google.com/forum/#!topic/nottinghack/HaIj_roLIPE SLA Printer Pledge (Google Group)]


[[Category:Pledge Drives]]
[[Category:Pledge Drives]]
[[Category:3D Printing]]
[[Category:3D Printing]]

Revision as of 09:17, 25 June 2019

Monoprice MP Mini SLA LCD High Resolution Resin 3D Printer

Pledge drive to buy a Monoprice MP Mini SLA LCD High Resolution Resin 3D Printer

Total cost: £249.00

This SLA 3D printer provides a higher resolution output than the Ultimaker Original+ which is filament based.

Stretch Goal/Additional Costs

Printed parts need to be washed. They then need to be cured, preferably in an enclosed environment with a powered filter. Costs estimated at £30, some parts may already be available.

Resin costs: £20/500ml, plus wastage

List of pledges

Please post on the google group mailing list if you really, truly have forgotten your HMS password and need someone else to update this.

Please pay with the reference SLAPRINTER-XX where XX is your initials and list the reference used below.

Who How Much Paid? Method Paid
James Taylor £15 No -
Andrew Walters £15 No -
David Spence £30 No -
Lee Hutchison £20 No -
Jon H £10 No Bank Transfer
User £0 No -

Note: Please try to make payment asap once target is met.

Further Details

For discussion see: