Resin Calibration Charts: Difference between revisions
No edit summary |
No edit summary |
||
| Line 12: | Line 12: | ||
[[File:AnyCubic Orange with 50 micron layers.jpg|thumb|AnyCubic Orange with 50 micron layers]] | [[File:AnyCubic Orange with 50 micron layers.jpg|thumb|AnyCubic Orange with 50 micron layers]] | ||
As an opaque resin the AnyCubic Orange appears to require a much longer cure time (20s at 20 microns) and is very sensitive to bed levelling. | |||
Test cards for AnyCubic Translucent Yellow resin will be uploaded when I am back in the space to photograph them. | |||
Currently the test cards are being kept near the printer for ease of reference. | |||
Revision as of 17:19, 28 November 2019
A page to collate resin calibration charts for the AnyCubic Photon 3D printer.
It is possible to print a Calibration Chart for a specific layer height with your resin to find a good starting point.
This process requires changing the printer's settings, printing one or more charts, and then restoring the previous settings. **Please make sure you are confident that you can restore the standard settings before starting this process.**
As an opaque resin the AnyCubic Orange appears to require a much longer cure time (20s at 20 microns) and is very sensitive to bed levelling.
Test cards for AnyCubic Translucent Yellow resin will be uploaded when I am back in the space to photograph them.
Currently the test cards are being kept near the printer for ease of reference.