Resin Calibration Charts: Difference between revisions
No edit summary |
mNo edit summary |
||
| Line 1: | Line 1: | ||
A page to collate resin calibration charts for the [[ | A page to collate resin calibration charts for the [[Anycubic Photon]] 3D printer. | ||
It is possible to print a [https://github.com/altLab/photon-resin-calibration Calibration Chart] for a specific layer height with your resin to find a good starting point. | It is possible to print a [https://github.com/altLab/photon-resin-calibration Calibration Chart] for a specific layer height with your resin to find a good starting point. | ||
Revision as of 17:19, 28 November 2019
A page to collate resin calibration charts for the Anycubic Photon 3D printer.
It is possible to print a Calibration Chart for a specific layer height with your resin to find a good starting point.
This process requires changing the printer's settings, printing one or more charts, and then restoring the previous settings. **Please make sure you are confident that you can restore the standard settings before starting this process.**
As an opaque resin the AnyCubic Orange appears to require a much longer cure time (20s at 20 microns) and is very sensitive to bed levelling.
Test cards for AnyCubic Translucent Yellow resin will be uploaded when I am back in the space to photograph them.
Currently the test cards are being kept near the printer for ease of reference.