Fire Pong/Packing List: Difference between revisions

Revision as of 09:18, 6 July 2016

Distribution segment
3 x small puffer segments + control boxes
2 x large puffer segments, accumulators and control box (one shared between large puffers)
2 x pilots for large puffers, low pressure hoses
Main control box
2 x WiiMotes + spare batteries (2 AA er Wiimote)
2 x Oversized paddles
5 x 3m, 5mm propane hoses (orange, LH 3/8 Hex nut on both ends)
1 x 2m, 8mm propane hose (orange, LH 3/8 Hex nut on both ends)
Propane cylinders
Weed burner & full can of butane for it
Bullhorn & spare batteries (8xC/R14's)

@@ Line 1: / Line 1: @@
 == Packing List ==
-System Components:
+=== System Components ===
 * Distribution segment
 * 3 x small puffer segments + control boxes
@@ Line 14: / Line 14: @@
 * Weed burner & full can of butane for it
 * Bullhorn & spare batteries (8xC/R14's)
+=== Tools ===
+==== Spanners for ====
+* 4 bar regulator nut spanner
+* 3/8 LH hose propane nut: 17mm
+* 1/4 hex nipple: 14mm
+* 1/2 hex nipple
+* Flashback regulator nut: 19mm
+* 1/4" ball valve body: 17mm
+* 1/2" ball valve body
+* Square gauge nuts: 14mm
+==== Screwdrivers for ====
+* Relay release screws
+* Control boxes
+* Terminal blocks
+==== Other ====
-Tools:
+* 2 x vice grips
-* Spanners for:
+* Leak detection spray
-** 4 bar regulator nut spanner
+* Tea towels
-** 3/8 LH hose propane nut: 17mm
+* PTFE tape
-** 1/4 hex nipple: 14mm
+* Hose clamps / jubilee clips
-** 1/2 hex nipple
+* Soldering iron & solder
-** Flashback regulator nut: 19mm
+* Work light
-** 1/4" ball valve body: 17mm
+* Work light charger (car & mains)
-** 1/2" ball valve body
+* Long extension lead
-** Square gauge nuts: 14mm
+* Event shelter
-* Screwdrivers for:
+* Tarp
-** Relay release screws
+* Stickers
-** Control boxes
-** Terminal blocks
-* Other:
-** 2 x vice grips
-** Leak detection spray
-** Tea towels
-** PTFE tape
-** Hose clamps / jubilee clips
-** Soldering iron & solder
-Spares:
+=== Spares ===
 * Spare fuses
 * Spare sparkers