Fire Pong/Packing List

Packing List

System Components

• Distribution segment
• 3 x small puffer segments
• 2 x large puffers
• 2 x pilots for large puffers, low pressure hoses
• Main control box
• 2 x WiiMotes + spare batteries (2 AA er Wiimote)
• 2 x Oversized paddles
• 5 x 3m, 5mm propane hoses (orange, LH 3/8 Hex nut on both ends)
• 1 x 2m, 8mm propane hose (orange, LH 3/8 Hex nut on both ends)
• Propane cylinders: 3 x 13kg
• Weed burner & full can of butane for it
• Bullhorn & spare batteries (8xC/R14's)
• Fire extinguisher: 2kg powder
• Fire extinguisher: 6kg powder
• Fire extinguisher: water (in case grass fire)
• Laptop / netbook for log monitoring & power supply
• Ethernet cable
• Amp & Speakers
• Audio cable for Pi -> Amp

Tools

Spanners for

• 4 bar regulator nut spanner (Ian's adjustable spanner)
• 3/8 LH hose propane nut: 17mm
• 1/4 hex nipple: 14mm
• 1/2 hex nipple
• Flashback regulator nut: 19mm
• 1/4" ball valve body: 17mm
• 1/2" ball valve body
• Square gauge nuts: 14mm

Screwdrivers for

• Relay release screws
• Control boxes
• Terminal blocks

Other

• 2 x vice grips
• Leak detection spray
• Tea towels
• PTFE tape
• Hose clamps / jubilee clips
• Soldering iron & solder
• Work light
• Work light charger (car & mains)
• Long extension lead
• Event shelter
• Tarp / bubble wrap
• Stickers
• Cable ties for sparkers
• Drill & bits
• Heat shrink (small and thicker) for replacing sparkers

Spares

• Spare fuses
• Spare sparkers
• Wire
• Arduino Pro Mini, header pins
• Micro SD card w/ RPi OS installed