Howto: Bambu A1 Mini: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
Newer edit →
Duncan (talk | contribs)
109 edits
An easy to follow guide to help people with Bambu A1 Mini basics.
 
Duncan (talk | contribs)
109 edits
No edit summary
Line 24: Line 24:


=== Find Access Code ===
=== Find Access Code ===
[[File:HowtoBambuA1Mini accesscode1.jpg|thumb|center|alt=Access code can be found under settings.|Access code can be found under settings.]]
[[File:HowtoBambuA1Mini accesscode2.jpg|thumb|center|alt=Access code can be found under Settings; Subpage 3 of 4; LAN Only Mode|Access code can be found under Settings; Subpage 3 of 4; LAN Only Mode]]
[[File:HowtoBambuA1Mini accesscode3.jpg|thumb|center|alt=The access code page. This image shows an old access code which does not work anymore.|The access code page. This image shows an old access code which does not work anymore.]]


=== Filament Stuck ===
=== Filament Stuck ===

Revision as of 13:08, 11 December 2024

Introduction

This is intended to be an easy to follow guide to help people with Bambu A1 Mini basics.

Switch it On

The on switch is on the back of the printer under the print bed.
The on switch is on the back of the printer under the print bed.

Check Print Bed

The print bead needs to be clean for maximum chance of a good print.
The print bead needs to be clean for maximum chance of a good print.

3D Print Area Tools

There are various tools available in the 3D print area for snipping filament, helping remove prints from the bed and maintaining the printers.
There are various tools available in the 3D print area for snipping filament, helping remove prints from the bed and maintaining the printers.

Load Filament

Inserting the filament.
Inserting the filament.
Control panel filament settings and actions.
Control panel filament settings and actions.
Change the filament settings.
Change the filament settings.
Start loading filament into the print head.
Start loading filament into the print head.
Check filament is correctly loaded.
Check filament is correctly loaded.
Removing previous users filament.
Removing previous users filament.

Find Access Code

Access code can be found under settings.
Access code can be found under settings.
Access code can be found under Settings; Subpage 3 of 4; LAN Only Mode
Access code can be found under Settings; Subpage 3 of 4; LAN Only Mode
The access code page. This image shows an old access code which does not work anymore.
The access code page. This image shows an old access code which does not work anymore.

Filament Stuck

TBD

Finished Printing

Unloading Filament

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=Howto:_Bambu_A1_Mini&oldid=29288"