Howto: Bambu A1 Mini

Introduction

This is intended to be an easy to follow guide to help people with Bambu A1 Mini basics.

Switch it On

The on switch is on the back of the printer under the print bed.

Check Print Bed

The print bead needs to be clean for maximum chance of a good print.

3D Print Area Tools

There are various tools available in the 3D print area for snipping filament, helping remove prints from the bed and maintaining the printers.

Load Filament

Inserting the filament.

Control panel filament settings and actions.

Change the filament settings.

Start loading filament into the print head.

Check filament is correctly loaded.

Removing previous users filament.

Find Access Code

Access code can be found under settings.

Access code can be found under Settings; Subpage 3 of 4; LAN Only Mode

The access code page. This image shows an old access code which does not work anymore.

Filament Stuck

TBD