Laser cutter/Materials
Introduction
This page is a list of materials that can be cut or engraved on the 'NEW' Nottinghack A0 laser cutter from Just Add Sharks, along with information on cutting speeds and power settings. Other useful information is also provided.
You can see a reasonably complete list of what is laser safe here and here.
The values on this page have been tested, but are guidelines. Always stay with the laser when it is running, and use your common sense!
DO NOT CUT
Vinyl, PVC - Contains chlorine, which generates glass and metal damaging acid fumes when burned!
Polycarbonate - clear polycarbonate looks looks just like acrylic!
Anything that produces fumes (eg; glued wood, many types of plastic).
Wood
Greyscale Engrave
Monoscale Engrave
Cutting
| Type | Power | Speed |
|---|---|---|
| 3mm birch ply | 65% | 55mm/s |
| 3mm birch ply | 65% | 55mm/s |
Veneer
Paper and Card
Go fast and run test cuts! Then help us by documenting what worked for you.
Plastic
Acrylic/Perspex
| Type | Power | Speed (mm/s) |
|---|---|---|
| 3mm Acrylic | 65% | (see whiteboard) |
| 5mm Acrylic | 65% | (see whiteboard) |
Metal
Anodised aluminium
Anodised aluminium can be etched (removing the anodising) at 20% power, 600mm/s. This has not been thoroughly tested, so be prepared to experiment.