Team:Resources/2014-12-02

Present: Andrew, Lionel, Russell.

Notes

Followup:

Brother label printer
- Dominic recommended the real thing, cheaper ones are bad. Staples recommended.
Card
- Card safe brought (also to test online) and installed
- Card has no money on - odd procedure? Will check in meeting/with James
Makro Run
- Brought 90% of list from last meeting - missing A3 paper and gloves
Small clean gloves
- Still to investigate
Lathe Parts
- Purchased
Storage Boxes
- David C has brought these (not including in budget - is capital equipment expenditure and covered by members)

New things to get:

TIG welding gloves (approved) - Russell to sort
Screw collection (approved) - Lionel has a good list and is working out what to buy
Wood Glue on board - not needed, half of a big one left
Members boxes on board - purchased

Lionel in meeting totalled up cost of things so far.

Total things brought since 1st May
- 3rd April 2013 (Blades, Drills, Marko run) - 117.97
- 1st May 2013 (RFID, Blades, Drills, blue roll) - 83.84
Total: £201.81
- 24th June (Arco; safety gear, mops and cleaning things, Swarfega) - 186.18
- 9th July (Gloves) - 100.92
- August - October (Bolts/Makro/Acetone) - 192.48
- 11th November (Oxygen) - 20.99
- 12th November (RFID cards) - 45 +45 for tons more (2 purchases done identical time!) (Removed - trustee approved)
- 12th November (Card, Amazon, Card safe) - 23.14
- 19th November (Makro) - 196.44
- 22nd November (Masks/Gas) - 38.99
Total: £759.14

If £200/month (£1400) this is 439.05 "under the made up budget" but massively over some months, under on others.

Makro card - very useful, we could do with one for the team. Check with James. - Andrew/Anyone
Check card money limit/time money is put on/etc. Check with James. - Andrew/Anyone
Screw list/buying screws - Lionel
Buying more A3 paper + brother labels from Staples - Anyone (low priority)
Gloves - safety ones XL and XS (once stock is checked) - Lionel/Russell
TIG gloves - Russell