EMF 2016 Meeting 2015-12-10

Fire Pong

Attendees

• Ian D
• Toby J
• Mouse

What Happened

• Discussed puffer design:
  • this page shows simple design a with feed tank, adjustable regulator (30-60 psi) into accumulator, solenoid / hand cranked ball valve to 0.5" barrel with a low pressure regulator from the accumulator side to a pilot. Feed to accumulator is connected for duration of performance... only solenoid is switched to make a puff. Pressure gauge on accumulator side to shoe what's ready to launch / calibrate system
  • 1 bar is about 15 psi
  • Cost of 0.5-4 bar (8-60 psi) regulator: ~£14, fits calor gas bottles
• Rooting around for parts; found:
  • Small (2kg) butane tank in donations which will make a usable accumulator tank for a small prototype. This tank has a 28 mbar low pressure regulator on it (presumably for cooking appliances), which includes a tap to stop flow. The tank is empty, except for a FOUL smelling residue. Under the regulator is a ball/spring value which we may need to push into the tank to get decent flow out of i, but perhaps we can just hold it open with a pin attachment...
  • Low pressure guage (2 bar/3-psi)
  • Butane cylinder from kitchen has 4.5 kg capacity- it is empty at time of writing
• Game design
  • If small puffers are cheap and we can have lots of them, make a pong game with puffers as the "puck", with big puffers as goals / game wins.
  • Multi-pong with LED strips and small puffers as a "cities" (a la missile command). Small puffer goes off when light "puck" gets past a player, then the city is destroyed. Once all cities destroyed, game is lost and big puffer goes off.
  • Some variation of these
  • Need to keep minimum safe distance in mind when designing game!
• We must be mindful not to piss people off by doing risky things in the space or getting the space in trouble with bizspace or what have you. This means heeding people's requests to stop if they feel we're doing something unsafe and generally being nice about the project

File:20151210 222759.jpg

Next

• Prototype with small tank from donations
  • Measure small tank fitting
  • Find parts:
    • Feed regulator. Adjustable from 20-100 psi ish, with gauge
    • Pilot regulator. Adjustable for prototyping, lower pressure, with gauge (0-20psi output?)
    • Metal pipe for barrel (1 meter of 22 mm copper plumbing pipe)
    • T joints
    • Hose
• Remind DC to fill butane cylinder for kitchen!