Talk:Pillar Drill

From Nottinghack Wiki
Revision as of 11:43, 3 March 2019 by Jon (talk | contribs) (Created page with "{{talkpage}} ==Comments operation circa 2016== Comments: The rack and pinion table lift is somewhat loose - as the rack is new, but the previous, broken one, was showing sign...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Comments operation circa 2016

Comments: The rack and pinion table lift is somewhat loose - as the rack is new, but the previous, broken one, was showing signs of wear, it is probable that a new pinion is needed. This certainly explains the recent problems with the rack bending and breaking - if the rack and pinion mesh correctly, they can probably hold against drill pressure even if the table lift lock is not tightened.

The new chuck guard needs a replacement wedge to ensure that it doesn't catch on the power switch. This has caused breakage previously, and is a design flaw with these drills having the switch on the front.

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=Talk:Pillar_Drill&oldid=19317"