Uploads by Danspencer101
Jump to navigation
Jump to search
This special page shows all uploaded files.
| Date | Name | Thumbnail | Size | Description | Versions |
|---|---|---|---|---|---|
| 23:36, 22 January 2019 | Gatekeeper Workshop Back door.jpg (file) |  |
82 KB | 1 | |
| 22:31, 22 January 2019 | Template Tool Green heading.PNG (file) |  |
124 KB | 1 | |
| 18:33, 16 January 2019 | Fusion 360 - 6mm - 2 Flute - Flat Mill - 2D Contour Ramp - Aluminium Settings.png (file) |  |
171 KB | 1 | |
| 18:31, 16 January 2019 | Fusion 360 - 6mm Carbide - 2 Flute - Flat Mill - 3D Adaptive - Aluminium Settings.png (file) |  |
58 KB | 1 | |
| 02:58, 16 January 2019 | Les Plywood - Bridge CNC OP1 - 4.jpeg (file) |  |
137 KB | 1 | |
| 02:57, 16 January 2019 | Les Plywood - Bridge CNC OP1 - 3.jpeg (file) |  |
202 KB | 1 | |
| 02:57, 16 January 2019 | Les Plywood - Bridge CNC OP1 - 2.jpeg (file) |  |
231 KB | 1 | |
| 02:56, 16 January 2019 | Les Plywood - Bridge CNC OP1 - 1.jpeg (file) |  |
238 KB | Aluminium cut on CNC Mill | 1 |
| 17:35, 12 January 2019 | Expanded dusty area - circa completion day.jpeg (file) |  |
4.15 MB | taken from woodworking Slack channel | 1 |
| 00:31, 12 January 2019 | Tool Silhouette Cameo.jpg (file) |  |
99 KB | 1 | |
| 22:11, 10 January 2019 | Les Plywood - Fretting 5.jpeg (file) |  |
132 KB | 1 | |
| 22:10, 10 January 2019 | Les Plywood - Fretting 4.jpeg (file) |  |
126 KB | 1 | |
| 22:10, 10 January 2019 | Les Plywood - Fretting 3.jpeg (file) |  |
87 KB | 1 | |
| 22:09, 10 January 2019 | Les Plywood - Fretting 2.jpeg (file) |  |
100 KB | 1 | |
| 22:09, 10 January 2019 | Les Plywood - Fretting 1.jpeg (file) |  |
101 KB | 1 | |
| 14:52, 10 January 2019 | Computer Quorra.jpg (file) |  |
83 KB | 1 | |
| 14:49, 10 January 2019 | Computer Fey.jpg (file) |  |
75 KB | 1 | |
| 12:55, 10 January 2019 | HTSD - Loose CNC tools needing a rack.jpeg (file) |  |
150 KB | The new rack will need to house these tools and should be expandable to house lots more milling bits and maybe a set of step clamps. | 1 |
| 22:10, 4 January 2019 | Template-Project QR Code test.jpeg (file) |  |
822 KB | Clicking through the QR Code link at the bottom of any Template:project box currently links to Nottingahck.org.uk Needs changing | 1 |
| 21:46, 4 January 2019 | Les Plywood - Neck after sanding flush (3).jpeg (file) | .jpeg) |
118 KB | 1 | |
| 21:46, 4 January 2019 | Les Plywood - Neck after sanding flush (2).jpeg (file) | .jpeg) |
196 KB | 1 | |
| 21:46, 4 January 2019 | Les Plywood - Neck after sanding flush (1).jpeg (file) | .jpeg) |
117 KB | 1 | |
| 20:36, 4 January 2019 | Les Plywood - After Gluing Fretboard (3).jpeg (file) | .jpeg) |
75 KB | 1 | |
| 20:36, 4 January 2019 | Les Plywood - After Gluing Fretboard (2).jpeg (file) | .jpeg) |
77 KB | 1 | |
| 20:36, 4 January 2019 | Les Plywood - After Gluing Fretboard (1).jpeg (file) | .jpeg) |
180 KB | 1 | |
| 20:18, 4 January 2019 | HTSD - Broken toilet seat.jpeg (file) |  |
113 KB | HTSD = Hack the space day The break isn't as bad as I thought, its just the lid. Still could use a replacement or the lid being removed so I'll leave it on the list. | 1 |
| 00:20, 4 January 2019 | Les Plywood Neck Model1.gif (file) |  |
726 KB | reduced file size so animation happens | 4 |
| 23:33, 3 January 2019 | Les Plywood - Fret Board Gluing set-up.jpg (file) |  |
1.11 MB | 1 | |
| 23:28, 3 January 2019 | Les Plywood - Test fitting neck pocket.jpg (file) |  |
1.08 MB | 1 | |
| 23:25, 3 January 2019 | Les Plywood - Chiselling Truss Rod Slot.jpeg (file) |  |
281 KB | Look at the warping! Its ok though because the neck is a bit too wide and I will be able to remove most of the twist after the fret board is glued on | 1 |
| 23:05, 3 January 2019 | Les Plywood - Neck after Gluing 2.jpeg (file) |  |
249 KB | 1 | |
| 23:04, 3 January 2019 | Les Plywood - Neck after Gluing.jpeg (file) |  |
287 KB | 1 | |
| 22:59, 3 January 2019 | Les Plywood - Neck Gluing Set-up.jpeg (file) |  |
142 KB | 1 | |
| 22:59, 3 January 2019 | Les Plywood - Neck Gluing headstock.jpeg (file) |  |
131 KB | 1 | |
| 04:05, 3 January 2019 | Les Plywood - Neck with laser masking.jpeg (file) |  |
3.51 MB | 1 | |
| 04:03, 3 January 2019 | Les Plywood - Truss Rod test fit.jpeg (file) |  |
1.63 MB | 1 | |
| 04:00, 3 January 2019 | Les Plywood - Neck heel.jpeg (file) |  |
1.51 MB | 1 | |
| 03:57, 3 January 2019 | Les Plywood - starting to Look like a guitar.jpeg (file) |  |
3.02 MB | 1 | |
| 01:58, 3 January 2019 | Les Plywood - Fretboard Lasercut.JPG (file) |  |
62 KB | screenshot uploaded from laserpc | 1 |
| 17:53, 2 January 2019 | Les Plywood - Fret Board, Fret Wire & Truss Rod.jpeg (file) |  |
96 KB | 1 | |
| 17:50, 2 January 2019 | Les Plywood - Truss Rod Width.jpeg (file) |  |
112 KB | 1 | |
| 01:25, 2 January 2019 | Les Plywood - Tune-O-Matic Model.gif (file) |  |
1,013 KB | 2 | |
| 00:45, 2 January 2019 | Les Plywood - Bridge CAD.PNG (file) |  |
206 KB | 1 | |
| 00:44, 2 January 2019 | Les Plywood - Bridge3.PNG (file) |  |
625 KB | 1 | |
| 17:39, 31 December 2018 | Les Plywood - String Spacing CAD.png (file) |  |
384 KB | 1 | |
| 17:30, 31 December 2018 | Les Plywood - String Spacing check.jpg (file) |  |
196 KB | 1 | |
| 12:53, 29 December 2018 | Les Plywood - Laminated PVC Sheet.jpg (file) |  |
225 KB | 1 | |
| 12:48, 29 December 2018 | Les Plywood - Bridge2.PNG (file) |  |
432 KB | 1 | |
| 12:48, 29 December 2018 | Les Plywood - Bridge1.PNG (file) |  |
442 KB | 1 | |
| 12:38, 29 December 2018 | Les Plywood - 3D Printed Stop Bar1.jpg (file) |  |
106 KB | 1 |
