View source for Laser cutter/LaserCut/Usage

This page will detail how to get the best out of LaserCut.

== What is a cut versus and engrave? ==

The only difference of the two is that an engrave covers a bounded area with lots of small cuts. This means you can "engrave" lines into something using just cuts of a lower power.

== Quirky Notes ==

The software has some oddities - there are things hidden behind scroll bars and please note: '''the enter key never saves settings''' (in many cases) so you must click "Ok" to save things.

Also at the moment the word "Download" really should be "Upload".

The long-running tools (such as "Preview" and "Calculate time") have no cancel button but pressing escape seems to exit them fine.

== Colours ==

To follow.

== Machine Settings ==

To follow.

[[Category:Laser Cutter]]