|
|
| (6 intermediate revisions by 5 users not shown) |
| Line 1: |
Line 1: |
| MIG (Metal Inert Gas) welding is a useful general technique for most ferrous metal work, it uses an electrode nozzle which guides filler wire from a spool and the arc is between the filler wire and the pieces to be joined. The nozzle allows a flow of inert shield gas around the working area to reduce slag creation.
| | #REDIRECT [[ESAB MIG Welder]] |
| | |
| | |
| Some MIG welders can be converted for different kinds of wire, but this often involves changing the polarity of operation, so the Hackspace MIG welder is only used with a ferrous wire.
| |
| | |
| | |
| The MIG welder can be considered a 'single-handed' welder, as separate filler-wire sticks are not used, but it is often best to steady the nozzle using both hands, to keep control over the wire being fed from the spool.
| |
| | |
| ==Shield gas ==
| |
| | |
| Until larger cylinders are installed in the Hackspace, the MIG welder uses small disposable cylinders of gas, installed in/attached to the welder itself.
| |
| | |
| ==Capacity and rating ==
| |
| | |
| ==Power supply ==
| |
| | |
| A standard 13A plug is used, so this welder can be used with any of these sockets in the metalwork / welding area. The power is controlled by a switch / trigger in the nozzle, so a no-volt release supply is less important than with the other welders.
| |
| | |
| [[Category:Tools_and_Equipment]] | |