Laser cutter/Materials: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
Jfowkes (talk | contribs)
New page. Information on thin cardboard.
 
Jfowkes (talk | contribs)
Line 5: Line 5:
=== Thin Cardboard ===
=== Thin Cardboard ===


Cutting Speed: 30 mm/s
*Cutting Speed: 30 mm/s
 
*Laser Current: 4mA
Laser Current: 4mA
 
These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power.
These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power.

Revision as of 13:51, 10 October 2011

Introduction

This page is a list of materials that can be cut on the Nottinghack laser cutter, along with information on cutting speeds and power settings. Other useful information is also provided.

Thin Cardboard

  • Cutting Speed: 30 mm/s
  • Laser Current: 4mA

These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power.