Difference between revisions of "User:Asj/Notes about laser cutting solder stencils"
< User:Asj
Jump to navigation
Jump to search
(Created page with "Most pads are ok - perhaps a bit large. Small pitch QFN packages are a problem. To do these, * For each QFN pad, downsize "solder paste absolute clearance" to -0.09 and prod...") |
(No difference)
|
Revision as of 16:52, 19 May 2024
Most pads are ok - perhaps a bit large.
Small pitch QFN packages are a problem. To do these,
- For each QFN pad, downsize "solder paste absolute clearance" to -0.09 and produce solder mask svg
- Configure Light burn to engrave at
- 100mm/s at 30%
- Line interval of 0.02mm