ARC welder: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
[[File:Arc Olympic Bantam.jpg|right|thumb|400px]]
The arc welder is the most basic king of welder, and uses an electrode 'stick' of filler wire. The arc is struck and controlled manually, requiring skill.
The arc welder is the most basic king of welder, and uses an electrode 'stick' of filler wire. The arc is struck and controlled manually, requiring skill.



Revision as of 15:28, 25 June 2014

The arc welder is the most basic king of welder, and uses an electrode 'stick' of filler wire. The arc is struck and controlled manually, requiring skill.

Different kinds of filler wire sticks are available with coatings to create a flux suitable for different metal combinations.

Capacity and rating

Power supply

A 32A plug and socket connection is used, with a pushbutton on/off control station and no-volt release. The supply is between phases (415V) allowing a greater welding capacity than previously (when a 13A / 240V supply was used).