Hackspace 2.5/ToDo

Metalworking

Electrical

• Hang lights ✅ (complete except grinding room + one in far corner)
• Install conduit ✅
• Install trunking ✅
• Pull cable ✅
• Install temporary control box / switching solution ✅
• Install control box feed (10A RCBO from main board, PVC conduit) ✅
• Test & Inspection ✅
• Remove last of temporary lighting solution ✅
• 13A power circuit on near wall ✅
• 13A power circuit on dance studio wall ✅
• Welding interlock (WIP)
• Heavy feed to interlock box (D63 - reuse from metalworking feed upstairs?)
• Install welding sockets - will require them being removed from upstairs
• Test & Inspection
• Make and install unistrut post for bandsaw socket
• 16/3 Socket for bandsaw (SWA on tray from DB down post to RCD in small box, RCD to socket)
• Complete traywork install
• Make and install rest of unistrut posts
• Install back wall small power circuit
• Install posts small power circuit (routing???)
• Corridor power circuit (PVC conduit)
• Install power for compressor (seperate feed, or tacked on to the end of the corridor power circuit)
• Test & Inspection, issue EIC

Blocked Tasks

• All of small grinding room
• Hanging final light

Non-Electrical

• Put the rest of the diffusers on the lights
• Plug in the batteries on the emergency lights (technically electrical I suppose)
• Move door currently on grinding room to far end of room
• Establish what else needs to be done to the grinding room before it's sensible to install electrics in there (finish walls, boxing, etc)
• Move stuff out of the way (particularly the pallet of metal things and the Warco - eek.)
• Design and install curtains/other dividing solution between welding quarter and the rest of the room to ensure that grinding dust is mostly kept out of the rest of the area
• Design and install ventilation setup for welding
• Finish ceiling in far corner of main space to allow final light to be hung
• Data cabling for NH-Tools
• Move tools / benches etc into place!
• Handles for doors
• Investigate possible leak in grinding room?

Epilogue

• Christen the room by smashing a bottle of Lucozade on it's bow (step one, find its bow...)
• Remove all infra tools/supplies from Downstairs Members' Storage to Team Storage
• Consider fire door (opening inwards probably not acceptable?)
• Have Schneider DB disconnected and sell it on eBay
• Tactically acquire vending machine for grinding discs and other consumables
• Pub

Bike Area

• Install Panel Lights