Wood lathe: Difference between revisions
Jump to navigation
Jump to search
Was this tool acquired after this pledge drive: Wood Lathe Pledge? |
mNo edit summary |
||
| (5 intermediate revisions by 3 users not shown) | |||
| Line 1: | Line 1: | ||
{{Tool | {{Tool | ||
|image= | |image=File:Tool Wood Lathe.jpg | ||
|manufacturer=Generic Chinese | |manufacturer=Generic Chinese | ||
|model=Similar to Charnwood 813 | |model=Similar to Charnwood 813 | ||
|obtained=Member Donation{{clarify|reason=Was this tool acquired after this pledge drive: [[Wood Lathe Pledge]]?}} | |obtained=Member Donation{{clarify|reason=Was this tool acquired after this pledge drive: [[Wood Lathe Pledge]]?}} | ||
|obtaineddate= | |obtaineddate= | ||
|location= | |location=Dusty Area | ||
|team=Woodworking | |team=Woodworking | ||
|induction=No | |induction=No | ||
| Line 13: | Line 12: | ||
}} | }} | ||
The current Wood Lathe is a Chinese model - the [https://www.charnwood.net/products/product/floorstanding-lathe-w813/category_pathway-2 Charnwood 813] is a close match. | '''Do not use this machines with materials that will generate silica dust. eg soapstone and other soft stones, sandstone, ceramics, gemstones''' | ||
A good reference on this subject https://ehs.princeton.edu/health-safety-the-campus-community/art-theater-safety/art-safety/sculpture | |||
The current Wood Lathe is a Chinese model - the [https://www.charnwood.net/products/product/floorstanding-lathe-w813/category_pathway-2 Charnwood 813] is a close match in terms of Specification. | |||
The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed. | |||
==Tips== | |||
The speed control must be set to a '''Low Speed before switch on'''. Once you've completed turning your part, the speed must be returned to a low speed before switching off. | |||
Make sure that the chuck is tightened with tools before use. | |||
{{note|If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.}} | |||
==Instruction Manual== | |||
<gallery perrow=3> | |||
Manual For Wood Lathe 1.jpg|Part 1 | |||
Manual For Wood Lathe 2.jpg|Part 2 | |||
Manual For Wood Lathe 3.jpg|Part 3 | |||
Manual For Wood Lathe 4.jpg|Part 4 | |||
Manual For Wood Lathe 5.jpg|Part 5 | |||
Manual For Wood Lathe 6.jpg|Part 6 | |||
Manual For Wood Lathe 7.jpg|Part 7 | |||
Manual For Wood Lathe 8.jpg|Part 8 | |||
Manual For Wood Lathe 9.jpg|Part 9 | |||
</gallery> | |||
==Resources== | |||
* [http://www.startwoodworking.com/plans/how-turn-basic-bowl How to Turn a Basic Bowl (Start Woodworking)] | |||
[[Category:Woodwork]] | [[Category:Woodwork]] | ||
[[Category:Tools and Equipment]] | [[Category:Tools and Equipment]] | ||
Latest revision as of 14:01, 4 September 2022
| Wood lathe | |
|---|---|
 | |
| Manufacturer | Generic Chinese |
| Model | Similar to Charnwood 813 |
| Obtained | Member Donation[clarify] |
| Location | Dusty Area |
| Team | Woodworking |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
Do not use this machines with materials that will generate silica dust. eg soapstone and other soft stones, sandstone, ceramics, gemstones
A good reference on this subject https://ehs.princeton.edu/health-safety-the-campus-community/art-theater-safety/art-safety/sculpture
The current Wood Lathe is a Chinese model - the Charnwood 813 is a close match in terms of Specification.
The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed.
Tips
The speed control must be set to a Low Speed before switch on. Once you've completed turning your part, the speed must be returned to a low speed before switching off.
Make sure that the chuck is tightened with tools before use.
Note: If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.Instruction Manual
-
Part 1 -
Part 2 -
Part 3 -
Part 4 -
Part 5 -
Part 6 -
Part 7 -
Part 8 -
Part 9
