Aluminium Makercoin Trial: Difference between revisions
m Danspencer101 moved page Dan's Makercoin Version 1 to Aluminium Makercoin Trial without leaving a redirect: Eh |
No edit summary |
||
(11 intermediate revisions by the same user not shown) | |||
Line 1: | Line 1: | ||
{{Project | |||
|image=File:DanS makercoin 5.jpg | |||
|name=Aluminium Makercoin | |||
|primary=[[User:Danspencer101|Danspencer101]] | |||
|created=04/06/2019 | |||
|completeddate=04/06/2019 | |||
|dormantdate= | |||
|version= | |||
|members= | |||
|status=Complete | |||
|type=member | |||
|livestatus= | |||
|qrmode=1 | |||
}} | |||
I wanted to have a go at making a maker coin just for fun. The coin has a topographic map of the UK on one side and a 3D scan of my head on the other. Many makercoins that I've seen on YouTube are 3D printed but I wanted to have a go at CNC milling one. | I wanted to have a go at making a maker coin just for fun. The coin has a topographic map of the UK on one side and a 3D scan of my head on the other. Many makercoins that I've seen on YouTube are 3D printed but I wanted to have a go at CNC milling one. | ||
Line 4: | Line 18: | ||
==Design== | ==Design== | ||
[[File:Dan Makercoin Design.gif|thumbnail|left|200px|Coin 3D Model]] | |||
I used a few different programs to put this model together. | I used a few different programs to put this model together. | ||
The first was [[ | The first was [[Skanect]] which I used to take a 3D scan of my head. The second is a website called [http://jthatch.com/Terrain2STL/ Terrain2Stl] which I used to get the depth map of the UK. I also used some software called [[Meshmixer]] to tidy both the head scan and the map and scale them to approximately the right dimensions. | ||
The coin itself was put together in [[Fusion 360]]. I was able to design the main coin body and then import & place the STL files in the required positions | The coin itself was put together in [[Fusion 360]]. I was able to design the main coin body and then import & place the STL files in the required positions | ||
{{clear}} | |||
==Manufacture== | ==Manufacture== | ||
I used [[Fusion 360]] to program the toolpath. | I used [[Fusion 360]] to program the toolpath. | ||
===Test | ===Test cut=== | ||
I used some laser cutter scrap to cut a wooden coin to test the size. | I used some laser cutter scrap to cut a wooden coin to test the size. This was cut using a 2mm ball nose bit. | ||
{{ | {| | ||
! | |||
! <gallery mode=packed heights=300px> | |||
File:DanS makercoin testcut.jpg|Wooden trial run to test the depth of the embossing out. | |||
File:DanS makercoin testcut2.jpg|Wooden trial run to test the depth of the embossing out. | |||
File:DanS makercoin testcut3.jpg|Wooden trial run to test the depth of the embossing out. | |||
</gallery> | |||
|} | |||
{{#widget:YouTube|id=cyrvxYeEmlo|width=388|height=700}} | |||
===Final Version=== | |||
For the first side, I used an adaptive toolpath with a 6mm tool to remove the majority of the material before switching to the 0.2mm Tapered bit. | |||
I was so impressed with how the tapered bit worked that I didn't bother with the roughing cut on the second side. Worked well! | |||
<gallery mode=packed heights=300px> | |||
File:DanS makercoin Cut Settings Parallel.png|Toolpath settings for the Parallel cut | |||
File:DanS makercoin Tool Settings1.png|Tool Parameters | |||
</gallery> | |||
{{clear}} | |||
===Cutting the real thing=== | ===Cutting the real thing=== | ||
<gallery> | To do the flip part of the 2-sided milling I used two bolts. The idea was that the bolts would remain clamped to the bed between the two sides. Unfortunately it didn't quite work as one of the bolts loosened and moved as I undid the top nut. This meant that the second side of the coin was slightly offset against the first. | ||
The next time I do this I will have a 3D Printed fixture that will remain clamped to the bed between the two OPs and hopefully get around this problem. | |||
<gallery mode=packed heights=250px> | |||
File:DanS makercoin 1.jpg|Cutting one side | File:DanS makercoin 1.jpg|Cutting one side | ||
File:DanS makercoin 2.jpg|How the workpiece was clamped | File:DanS makercoin 2.jpg|How the workpiece was clamped | ||
Line 26: | Line 65: | ||
File:DanS makercoin 5.jpg|Head Side | File:DanS makercoin 5.jpg|Head Side | ||
</gallery> | </gallery> | ||
[[Category:CNC Projects]] |
Latest revision as of 16:46, 6 May 2020
Aluminium Makercoin | |
---|---|
Primary Contact | Danspencer101 |
Created | 04/06/2019 |
Completed | 04/06/2019 |
Status | Complete |
Type | Members Project |
QR code |
I wanted to have a go at making a maker coin just for fun. The coin has a topographic map of the UK on one side and a 3D scan of my head on the other. Many makercoins that I've seen on YouTube are 3D printed but I wanted to have a go at CNC milling one.
This project is my first foray into flip milling (2 sided milling) so I'm not expecting it to be perfect.
Design
I used a few different programs to put this model together.
The first was Skanect which I used to take a 3D scan of my head. The second is a website called Terrain2Stl which I used to get the depth map of the UK. I also used some software called Meshmixer to tidy both the head scan and the map and scale them to approximately the right dimensions.
The coin itself was put together in Fusion 360. I was able to design the main coin body and then import & place the STL files in the required positions
Manufacture
I used Fusion 360 to program the toolpath.
Test cut
I used some laser cutter scrap to cut a wooden coin to test the size. This was cut using a 2mm ball nose bit.
|
---|
Final Version
For the first side, I used an adaptive toolpath with a 6mm tool to remove the majority of the material before switching to the 0.2mm Tapered bit.
I was so impressed with how the tapered bit worked that I didn't bother with the roughing cut on the second side. Worked well!
-
Toolpath settings for the Parallel cut
-
Tool Parameters
Cutting the real thing
To do the flip part of the 2-sided milling I used two bolts. The idea was that the bolts would remain clamped to the bed between the two sides. Unfortunately it didn't quite work as one of the bolts loosened and moved as I undid the top nut. This meant that the second side of the coin was slightly offset against the first.
The next time I do this I will have a 3D Printed fixture that will remain clamped to the bed between the two OPs and hopefully get around this problem.
-
Cutting one side
-
How the workpiece was clamped
-
'Clamping post' arrangement
-
Map Side
-
Head Side