Wood lathe: Difference between revisions
Jump to navigation
Jump to search
mNo edit summary |
mNo edit summary |
||
| Line 12: | Line 12: | ||
}} | }} | ||
'''Do not use this machines with materials that will generate silica dust. eg soapstone and other soft stones, sandstone, ceramics, gemstones''' | |||
A good reference on this subject https://ehs.princeton.edu/health-safety-the-campus-community/art-theater-safety/art-safety/sculpture | A good reference on this subject https://ehs.princeton.edu/health-safety-the-campus-community/art-theater-safety/art-safety/sculpture | ||
Latest revision as of 14:01, 4 September 2022
| Wood lathe | |
|---|---|
 | |
| Manufacturer | Generic Chinese |
| Model | Similar to Charnwood 813 |
| Obtained | Member Donation[clarify] |
| Location | Dusty Area |
| Team | Woodworking |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
Do not use this machines with materials that will generate silica dust. eg soapstone and other soft stones, sandstone, ceramics, gemstones
A good reference on this subject https://ehs.princeton.edu/health-safety-the-campus-community/art-theater-safety/art-safety/sculpture
The current Wood Lathe is a Chinese model - the Charnwood 813 is a close match in terms of Specification.
The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed.
Tips
The speed control must be set to a Low Speed before switch on. Once you've completed turning your part, the speed must be returned to a low speed before switching off.
Make sure that the chuck is tightened with tools before use.
Note: If chuck and work-piece is heavy reduce the speed slowly otherwise there is a danger of the chuck unscrewing itself due to the momentum.Instruction Manual
-
Part 1 -
Part 2 -
Part 3 -
Part 4 -
Part 5 -
Part 6 -
Part 7 -
Part 8 -
Part 9
