Tools/We Have: Difference between revisions
< Tools
| Line 272: | Line 272: | ||
| 100mm Angle Grinder || 1 || cutting discs || N || TC || Stayer SA100 450W 10Krpm || [[File:Nottinghack_Tools_Angle_Grinders.jpg | thumb | 100px | Centre Front]] | | 100mm Angle Grinder || 1 || cutting discs || N || TC || Stayer SA100 450W 10Krpm || [[File:Nottinghack_Tools_Angle_Grinders.jpg | thumb | 100px | Centre Front]] | ||
|- | |- | ||
| 115mm Angle Grinder || 0 || cutting discs || - || - || <del>Clarke CAG122 900W 10Krpm</del> || | | 115mm Angle Grinder || 0 || cutting discs || - || - || <del>Clarke CAG122 900W 10Krpm</del> Gearbox stripped - Replacement to be obtained (Aug2015) || | ||
|- | |- | ||
| 230mm Angle Grinder || 1 || cutting discs || N || TC || Ferm FAG-230 1550W 6000rpm || [[File:Nottinghack_Tools_Angle_Grinders.jpg | thumb | 100px | Left Rear]] | | 230mm Angle Grinder || 1 || cutting discs || N || TC || Ferm FAG-230 1550W 6000rpm || [[File:Nottinghack_Tools_Angle_Grinders.jpg | thumb | 100px | Left Rear]] | ||
| Line 304: | Line 304: | ||
| Detail Sander || 1 || Small Mouse Sheets || N || TC ||Challenge MS3467 || [[File:Nottinghack_Tools_Detail_Sanders.jpg | thumb | 100px | Right]] | | Detail Sander || 1 || Small Mouse Sheets || N || TC ||Challenge MS3467 || [[File:Nottinghack_Tools_Detail_Sanders.jpg | thumb | 100px | Right]] | ||
|- | |- | ||
| Belt Sander || 1 || Sanding Belts || N || TC || Powercraft 2408 950W | | Belt Sander || 1 || Sanding Belts || N || TC || <del>Powercraft 2408 950W</del> Replaced by: Clarke ????? || | ||
|- | |- | ||
| Bench Belt / Disc Sander || 1 || Belts and Discs || N || W || Perform CCBDS46 1/2HP 150mm disc / 199mm x 915mm belt || | | Bench Belt / Disc Sander || 1 || Belts and Discs || N || W || Perform CCBDS46 1/2HP 150mm disc / 199mm x 915mm belt || | ||
Revision as of 09:33, 14 August 2015
This is a list of the tools available at the Nottingham hackspace. This does NOT include loaned or personal equipment, this is a list of everything that has been donated or purchased. Please feel free to add any tools you donate (but please label with green tape to distinguish the item).
Many tool donations are appreciated - check the wish list for what we really would like (6 axis CNC mill should be next, right?), but space is now becoming limited, so please check to make sure that a tool really is wanted - don't just discard stuff to the Hackspace. (We now seem to have 8 various power Jigsaws, so need to move some of them on elsewhere)
Page incomplete / in progress and some tools that are on loan may be mis-identified here.--Dclarke 14:30, 2 July 2012 (EST)
Recent purchases and donations
These items will in due course be added to the full list.
| Tool | Quantity | Consumables? | More required? | Location | Comments | Looks Like |
|---|---|---|---|---|---|---|
| Fobco bench drill (for metalwork) | 1 | n/a | MB |  | ||
| M3 Drilling and tapping set | 1 | n/a | ||||
| Orange handled bradawls | 2 | n/a | WT |  | ||
| Tenon Saw | 1 | n/a | WT |  | ||
| 22" fine hand saw (for plastics) | 1 | n/a | WT |  | ||
| Quick clamps (blue) | 2 | n/a | CR |  | ||
| F-Clamps | 2 | n/a | CR | | ||
| Countersink bits | 2 | n/a | WB | |||
| Forstner Bits | Set of 7 | n/a | TD | |||
| Desoldering sucker | 2 | n/a | ER | |||
| M8 helicoil kit | 1 | n/a | Tr | |||
| A1 cutting mat | 2 | n/a | ST |  | ||
| Maun safety cutting rulers | 2 | n/a | ST |  | ||
| Swann morton scalpels | 2 | n/a | ST | |||
| Scalpel blades | n/a | n/a | Bi | |||
| Weller t/c soldering iron (black) | 2 | n/a | EB | |||
| Weller t/c soldering iron (hot blue) | 1 | n/a | EB |
Hand Tools / General / Woodworking
| Tool | Quantity | Consumables? | More required? | Location | Comments | Looks Like |
|---|---|---|---|---|---|---|
| Marking Gauge | 1 | n/a | YES | WB | ||
| Carpenters' Bevel | 1 | n/a | N | WT | ||
| Machine Vice | 2 | n/a | N | WB | 2", 4" | |
| Flat Surform | 1 | blades | N | WT | ||
| Curved Surform | 1 | blades | N | WT | ||
| Hacksaw | 5 | blades | N | WT+MB | ||
| Junior Hacksaw | 3 | blades | N | WT | ||
| Steel Wire Cutters | 1 | n/a | NO | |||
| Padsaw | 2 | blades | N | WT | ||
| Wood (panel) saw | 4 | n/a | YES | WT | 16", 20"(2), 22" | |
| 18" Mitre saw | 2 | n/a | N | W | Fever Industrial | |
| Mitre Box | 2 | n/a | N | W | Plastic | |
| Drill Brace | 1 | n/a | N | FC | ||
| Hand Drill | 2 | n/a | N | FC | ||
| Breast Drill | 1 | n/a | N | FC | broken | |
| Market Stall Clamps | 5 | n/a | N | FC | 13 large, 16 medium 22 small and 2 tiny | |
| Quick clamps | 5 | n/a | YES | WT | 6" | |
| G clamps | 5 | n/a | YES | FC | 2x6", 2x2", 1x1" | |
| Crab clamps | 2 | n/a | N | FC | 6" | |
| Cramp Heads | 2 (prs) | n/a | N | FC | ||
| T-bar 60" sash cramps | 2 | n/a | N | FC | ||
| Small clamps | 2+ | n/a | N | FC | ||
| Bricklayers' Trowel | 1 | n/a | N | FC | rusty | |
| Plasterers' Float | 1 | n/a | N | WT | rusty | |
| Long (150mm+) 'pilot' drill bit set | 1 | N | ||||
| Wallpaper Shears | 1 | n/a | N | WB | need cleaning | |
| Small Garden Shears | 1 | n/a | N | WB | ||
| Spanner Set | 1 | n/a | YES | WT | ||
| Adjustable Spanner | 2 | n/a | YES | MB | 8" & 10" | |
| Engineers' Vice | 1 | n/a | N | FC | Record No.2 | |
| Engineers' Vice | 1 | n/a | N | FC | Sealy 125 | |
| Carpenters' Vice | 1 | n/a | N | FC | 6" | |
| Wood Chisel | 15 | n/a | YES | FC | ||
| Cold Chisel | 5 | n/a | YES | WB+FC | ||
| Files (wood/metal) Set | 2 | n/a | YES | WT+FC | ||
| Needle Files Set | 2 | n/a | YES | FC | ||
| Gimlet | 1 | n/a | YES | WB | ||
| Long nose pliers | 1 | n/a | N | TD | ||
| Pliers | 2 | n/a | N | TD | ||
| Parallel-Jaw Pliers | 1 | n/a | N | MB | ||
| Slipjoint wrench | 3 | n/a | YES | MB+WB | Better quality needed | |
| 'Mole' grip wrench | 3 | n/a | YES | MB | ||
| Tin snips | 2 | n/a | YES | WB+MB | Sheetmetal toolkit | |
| Mitre (pictureframe) clamps | 4 | n/a | N | FC | ||
| Frame clamps | 3 | n/a | YES (4 is a set) | |||
| Coping saw | 1 | Blades | N | WT | ||
| Pop Riveter | 3 | Rivets | N | TD | ||
| Eyelet Hole punch | 1 | n/a | N | SC | ||
| Hole Saws | 2 | n/a | YES | FC | Lightweight sets | |
| Hole Saws | 1+ | n/a | YES | FC | Various H/D ones | |
| 2" Tape gun | 0 | Tape | YES | Missing? | ||
| Pipe cutter | 2 | n/a | N | TC | ||
| 24" Steel Rule | 1 | n/a | N | WT | ||
| 12" Steel Rule | 1 | n/a | N | WT | ||
| Alloy Yardstick | 1 | n/a | N | WT | ||
| Tape measure | 4 | n/a | YES | TD | ||
| Square | 4 | n/a | YES | WT+MB | ||
| 400mm x 500mm Square | 1 | n/a | N | WT | ||
| Adjustable Square | 2 | n/a | YES | WT | ||
| Spirit Level | 4 | n/a | N | WT | 6', 4', 3', 2x torpedo | |
| Small glue gun | 1 | Small glue sticks | YES | SR | ||
| Small table clamp | 1 | n/a | YES | WB | ||
| Claw Hammer | 3 | n/a | YES | WT | ||
| Pin (pictureframe) Hammer | 2 | n/a | YES | WT | ||
| Lump Hammer | 1 | n/a | YES | MB | ||
| Planishing Hammer | 1 | n/a | YES | MB | Sheetmetal toolkit | |
| Ballpein Hammer | 1 | n/a | N | WB | Heavy | |
| Dollies | 2 | n/a | YES | MB | Sheetmetal toolkit | |
| Knife - Stanley | 1 | Blades | YES | TC | ||
| Allen Key Set | 1+ | n/a | YES | TC | ||
| Torx Key Set | 1+ | YES | TC | |||
| HSS Drill Bit Set | 1+ | YES | TC | |||
| Wood Drills | 1+ | N | TC | |||
| Flat Drills | 1+ | N | TC | |||
| Masonry Drills | 1+ | N | TC | |||
| Screw drivers | 50+ | n/a | YES | WT | Better Quality / dispose of excess | |
| Yankee screwdriver | 2 | n/a | N | WT | One is not so good | |
| Cutting Mat | 1 | n/a | YES | |||
| Goggles | 4 | n/a | YES | SR | More elastic-band ones | |
| Staple Gun | 1 | n/a | N | TC |  | |
| Hand Punch set | 1 | n/a | N | TC | ||
| Plane | 1 | n/a | N | WB | Stanley Handyman | |
| Plane | 1 | n/a | N | WB | Stanley SB3 | |
| Plane | 1 | n/a | N | WB | Marples 12" | |
| Wooden Planes | 2 | n/a | N | FC | Antiques - possible project to restore | |
| Welders Wire Brush | 1 | n/a | N | WT |
Power Tools
| Tool | Quantity | Consumables? | More required? | Location | Comments | Looks Like |
|---|---|---|---|---|---|---|
| Myford Super 7 Lathe | 1 | N | W |  | ||
| WoodWise Lathe | 1 | Faceplates, Chucks | N | W | Like Machine Mart CWL12D | |
| Metal Cut-off Saw | 1 | N | MB | Stayer TF84 225mm 85rpm | ||
| Donkey Saw | 1 | N | W | Rapidor |  | |
| Metal Chop Saw | 1 | N | W | De Walt (LTL) | ||
| 100A Arc Welder | 1 | N | MB | Draper 87939 | ||
| MIG Welder | 1 | N | MB | Sealy MightyMIG 120XT mkII | ||
| Power Washer | Y | |||||
| Twin 6" Grinding Wheel | 1 | N | MB | Parkside PDOS200A1 2950rpm | ||
| 100mm Angle Grinder | 1 | cutting discs | N | TC | Stayer SA100 450W 10Krpm |  |
| 115mm Angle Grinder | 0 | cutting discs | - | - | ||
| 230mm Angle Grinder | 1 | cutting discs | N | TC | Ferm FAG-230 1550W 6000rpm | |
| 24V Cordless Hammer Drill | 1 | N/A | N | TC | Challenge Pro |  |
| Mains Hammer Drill | 1 | N/A | N | TC | Performance Power 710W | |
| Classic B&D Drill + Stand | 1 | N/A | N | WB | B&D DNJ70B 370W | |
| Router and Table | 1 | Router Bits | N | TC | Powercraft PBF-1200 1200W 9-30Krpm 6mm, 8mm collets |  |
| Biscuit Jointer | 1 | Biscuits | N | TC | Powercraft 850W |  |
| Power Plane | 1 | N | TC | | ||
| Air Compressor | 1 | N/A | N | TC | Direct Power |  |
| Air Nailer & Stapler | 1 | Nails & Staples | N | TC | Parkside PDT40A1 | |
| Cordless Drill / Driver | 2 | Driver Bits | N | Hitachi DS14DVC 14.4V 1250rpm | ||
| Cordless Hammer Drill / Driver | 2 | Driver Bits | N | Hitachi DV14DVC2 14.4V 1500rpm | ||
| Cordless Hammer Drill / Driver | 1 | Driver Bits | N | Direct Power TP18CD 18V 1300rpm | ||
| Mouse Sander | 1 | Large Mouse Sheets | N | TC | Bosch PSM80A |  |
| Detail Sander | 1 | Small Mouse Sheets | N | TC | Bosch PDA120E | |
| Detail Sander | 1 | Small Mouse Sheets | N | TC | Challenge MS3467 | |
| Belt Sander | 1 | Sanding Belts | N | TC | ||
| Bench Belt / Disc Sander | 1 | Belts and Discs | N | W | Perform CCBDS46 1/2HP 150mm disc / 199mm x 915mm belt | |
| Finishing Sander | 1 | Sanding Sheets | N | TC | Ferm VM-150 135W 1/3 sheet |  |
| Orbital Sander | 1 | Sanding Sheets | N | TC | Powercraft S1A-AK2J8-125TB 420W 125mm | |
| Circular Saw | 1 | N/A | N | WS | Performance Power FMTC184SFD 1200W 184mm |  |
| 210mm Cutoff Saw | 1 | N/A | N | WB | Challenge MMS0649 1200W | |
| (Cutoff Saw) | 1 | N | Ferm FKZ-205 (in box) | |||
| Band Saw | 1 | 56 1/2" Blades | N | W | Schneider SCH190 250W 1500rpm | |
| 10" Table Saw | 1 | N | Performance Power 1500W 5700rpm | |||
| (Saw Bench) | 1 | N | Ferm FZB-720 (in box) | |||
| Bench Drill (+ machine vice) | 1 | N/A | N | WB | Wickes 250W | |
| Radial arm pillar drill | 1 | N/A | N | W | Sealey | |
| Jigsaw | 1 | blades | N | TC | Bosch PST650 500W 3100rpm | |
| Jigsaw | 1 | blades | N | TC | B&D KS630 370W 3200rpm | |
| Jigsaw | 1 | blades | N | TC | B&D KS888E 500W 3200rpm | |
| Jigsaw | 1 | blades | N | TC | Ryobi EJS-500 400W 2600rpm | |
| Shop vac | 6 | N | W | We have 2 Henries (red), Kerstar (blue) and Hoover (green) as well as a Vax (orange) plus a Dyson | ||
| 0 | N/A | Y | Failed and scrapped / Jan 13 | | ||
| Small glue gun | 1 | Small glue sticks | N | SR | ||
| Large glue gun | 1 | Large glue sticks | N | SR | ||
| Dremel Rotary Tool | 2 | N/A | N | TC |  |
Electronics Tools / Equipment
| Tool | Quantity | Consumables? | More required? | Location | Comments | Looks Like |
|---|---|---|---|---|---|---|
| PCB Drill | 1 | N/A | N | EB | ||
| Bubble Etch Tank | 1 | N/A | N | EB | ||
| UV Exposuure Box | 1 | N/A | N | EB | ||
| PCB Lightbox | 1 | N/A | N | EB | ||
| Multimeters | 3 | N/A | N | SR | ||
| Oscilloscopes | 2 | N/A | N | EB | ||
| Bench PSU | 2 | N/A | N | EB | ||
| Wire strippers | 3 | N/A | YES | EB | ||
| Side cutters | 3 | N/A | YES | EB | ||
| Locking Wire Pliers | 1 | wire | NO | TD | ||
| Crimp Tool | 1 | N/A | YES | EB | For Molex KK crimps | |
| Crimp Tool | 1 | N/A | YES | EB | Basic R/B/Y | |
| Cat5 | 3@30cm, 2@1m, 3@3m | N/A | YES | SR |
Test instruments
| Instrument | Quantity | Location | Comments | Looks Like |
|---|---|---|---|---|
| 2KΩ/Volt Analogue Multimeter | 1 | SR | ||
| Kopel 061 Clamp ammeter | 1 | SR | with 500V insulation tester |  |
| Bench ammeter 0-30mA | 1 | SR |  | |
| Bench ammeter 0-150mA | 1 | SR | ||
| Switched range digital multimeter | 1 | SR | Rapid 328 | |
| Switched range digital multimeter | 1 | SR | Sinometer MS8230 | |
| Autorange digital multimeter | 1 | SR | Voltcraft 96 | |
| Metal / Voltage / Stud detector | 1 | SR | ||
| Voltage / Continuity tester | 1 | SR | MM Electrical | |
| 13A socket checker | 1 | SR | RS |  |
| Digital thermometer with thermocouple probe | 1 | SR | ||
| High Safety DMM | 1 | SR | Corelectrics M300 |
Locations
B - Blue Room
S - Studio
W - Workshop
Bi - Bisley cabinet in workshop
EB - Electronics Bench
FC - Crate on floor
MB - Metalwork Bench
SR - Storage Rack
ST - Studio / Craft Bins
TC - Tool Cupboard
TD - Tool Drawers
TD2 - Tool Drawers
Tr - Triumph cabinet in workshop
WB - Bench along window wall
WT - Woodworking / General Toolboard