CNC Tool Storage

CNC Tool Storage
Primary Contact	Danspencer101
Created	31/01/2019
Completed	{{{completeddate}}}
Dormant	{{{dormantdate}}}
Version	{{{version}}}
Members	Anyone can chip in with this
Manufacturer	{{{manufacturer}}}
Model	{{{model}}}
Location	[[{{{location}}}]]
GitHub / Repo	{{{repo}}}
Status	Planning
Type	Hackspace Infrastructure
Live Status	{{{livestatus}}}
QR code

This project forms the first step towards making the CNC machine more accessible. The aim is to provide clear storage for a small selection of tools, each with a linked Fusion 360 Tool Library, that can be used by beginners to the CNC Area, i.e. most of the membership. Currently, The collets and tools are currently sitting loose on the stepper controller under the CNC PC monitor. I would like to get some kind of tool rack made to better organise the area. The rack should make it clear what each tool is and will have a physical link via a QR Code, or similar, to a Fusion 360 library containing the recommended Speeds & feeds for that tool.

My initial thought is that this will be a small set of drawers that can expand as required in a modular way. 3D Printing is a good way forward potentially as the QR codes can be printed in with each drawer. Each size group could also be produced in a different colour; this will aid understanding of spindle speed/ feed rates. E.g. Blue tools will need a 15000rpm spindle speed, Red tools will need a 10000rpm spindle, etc.

Requirements

Tools

The rack should be aimed at beginner CNC'ists and should cater mainly towards cutting wood. People who want to cut harder materials like aluminium will likely bring their own milling bits due to high risk of snaps.

At a minimum I would like the rack to hold:

Tool	Dimension	Quantity
Collet	ø1/8" (ø3.175mm)	1
Collet	ø6mm	1
Collet	ø8mm	1
Collet	ø10mm	1
Spanner		1
T-Slot Nut	15mm x 12mm x 15mm "ish"	5
M6 Bolt	M6x20mm	5
M6 Bolt	M6x50mm	5
End Mill	1/8" (3.175mm) 2-Flute Carbide	5
Ball Nose Mill	1/8" (3.175mm) 2-Flute Carbide	5
End Mill	6mm 2-Flute Carbide	3
Ball Nose Mill	6mm 2-Flute Carbide	3
DTI	30mm x 60mm x 15mm "ish"	1
Digital Calipers	200mm x 80mm x 30mm "ish"	1

Size

This will sit next to the desktop that drives the CNC on the table. The design should also feature the ability to be wall mounted if required in the future.

The available footprint on the desk is ???mm x ???mm.

Initial Concepts

Concept 1

10 bits can be stored laying flat in the tray. Awkward to pick the bits up due to how fiddly it all is.

Collet stored to right of tray alongside relevent bits.

Not a good concept.

• 
• 

Concept 2

A bit better. 10 Bits can be stored with a slight incline so the tips can be grabbed easily. It is still a little awkward due to limited clearance under the tip.

Playing with the idea of a tool setter; could make it easier to understand tool stick-out for newcomers to CNC. A tool stick-out parameter is also shown in the Fusion 360 tool library.

Areas to work on

• Still very little thought put into how this will work as a drawer.
• Need to incorporate a QR code somewhere that links to a Fusion 360 tool library.

• 
  Picture 1
• 
  Picture 2
• 
  Picture 3
• 
  Fusion 360 Files

Concept 3

Some modularity baked in to the design, although at the moment each shelf unit just sits on top of the last. I haven't come up with a way to clip them together yet.

Each drawer is held in place by a spring clip.

• 
  Picture 1
• 
  Picture 2
• 
  Motion Demo