Laser cutter/Materials: Difference between revisions
Jump to navigation
Jump to search
New page. Information on thin cardboard. |
|||
| Line 5: | Line 5: | ||
=== Thin Cardboard === | === Thin Cardboard === | ||
Cutting Speed: 30 mm/s | *Cutting Speed: 30 mm/s | ||
*Laser Current: 4mA | |||
Laser Current: 4mA | |||
These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power. | These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power. | ||
Revision as of 13:51, 10 October 2011
Introduction
This page is a list of materials that can be cut on the Nottinghack laser cutter, along with information on cutting speeds and power settings. Other useful information is also provided.
Thin Cardboard
- Cutting Speed: 30 mm/s
- Laser Current: 4mA
These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power.