Team:CNC/Risk Assessments/CNC Routing: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
Newer edit →
Created page with "{{RiskAssessment |name = CNC Routing |assessmentType = Activity |reviewed = 2024-02-02 |nextReview = 2025-02-02 | notes = The CNC router does not..."
 
No edit summary
Line 2: Line 2:
|name          = CNC Routing
|name          = CNC Routing
|assessmentType = Activity
|assessmentType = Activity
|reviewed      = 2024-02-02
|reviewed      = 2024-11-11
|nextReview    = 2025-02-02
|nextReview    = 2025-11-11


| notes        = The CNC router does not require an induction, but you are expected to either have a good understanding of CNC, or be prepared to self study.
| notes        = The CNC router does not require an induction, but you are expected to either have a good understanding of CNC, or be prepared to self study.
Line 9: Line 9:
|risk_1        = '''Electrical Shock''' due to damaged cabling or poor earthing.  
|risk_1        = '''Electrical Shock''' due to damaged cabling or poor earthing.  
|mitigation_1  = Portable Appliance Testing (PAT) is performed according to a schedule. A visual inspection of the appliance should take place prior to use of a soldering iron.
|mitigation_1  = Portable Appliance Testing (PAT) is performed according to a schedule. A visual inspection of the appliance should take place prior to use of a soldering iron.
|score_1        = 5/1


|risk_2        = '''Noise''' during cutting operations.
|risk_2        = '''Noise''' during cutting operations.
|mitigation_2  = Ear defenders and single-use ear plugs are available near the CNC router.  
|mitigation_2  = Ear defenders and single-use ear plugs are available near the CNC router.
|score_2        = 3/5


|risk_4        = '''Injury''' due to the workpiece coming loose during routing.
|risk_4        = '''Injury''' due to the workpiece coming loose during routing.
|mitigation_4  = There are various options for clamping the workpiece to the CNC bed. These should be used in excess and if any movement is detected, the emergency stop button should be pressed.
|mitigation_4  = An emergency stop button is located next to the CNC router. There are various options for clamping the workpiece to the CNC bed. These should be used in excess and if any movement is observed, the emergency stop button should be pressed.
|score_4        = 5/3


|risk_5        = '''Injury''' due to sharp edges or swarf.
|risk_5        = '''Injury''' due to sharp edges or swarf.
|mitigation_5  = Gloves should be worn when removing a workpiece from the CNC router, after ensuring the machine is in a safe state. Swarf must be cleaned up after use.
|mitigation_5  = Ensure the router head has been moved away from the workpiece and use either compressed air or the vacuum cleaner to remove swarf.  
|score_5        = 2/4
}}
}}

Revision as of 13:24, 11 November 2024

Name CNC Routing
Type Activity (e.g. Tool Usage)
Last Reviewed 2024-11-11
Next Review 2025-11-11

The CNC router does not require an induction, but you are expected to either have a good understanding of CNC, or be prepared to self study.

Risk Existing Mitigations Severity / Likelihood Assessment Action Required Residual Risk
Electrical Shock due to damaged cabling or poor earthing. Portable Appliance Testing (PAT) is performed according to a schedule. A visual inspection of the appliance should take place prior to use of a soldering iron. 5/1 0
Noise during cutting operations. Ear defenders and single-use ear plugs are available near the CNC router. 3/5 0
{{{risk_3}}} {{{mitigation_3}}} 0/0 0
Injury due to the workpiece coming loose during routing. An emergency stop button is located next to the CNC router. There are various options for clamping the workpiece to the CNC bed. These should be used in excess and if any movement is observed, the emergency stop button should be pressed. 5/3 0
Injury due to sharp edges or swarf. Ensure the router head has been moved away from the workpiece and use either compressed air or the vacuum cleaner to remove swarf. 2/4 0
{{{risk_6}}} {{{mitigation_6}}} 0/0 0
{{{risk_7}}} {{{mitigation_7}}} 0/0 0
{{{risk_8}}} {{{mitigation_8}}} 0/0 0
{{{risk_9}}} {{{mitigation_9}}} 0/0 0
{{{risk_10}}} {{{mitigation_10}}} 0/0 0
{{{risk_11}}} {{{mitigation_11}}} {{{score_11}}} 0
{{{risk_12}}} {{{mitigation_12}}} 0/0 0
{{{risk_13}}} {{{mitigation_13}}} 0/0 0
{{{risk_14}}} {{{mitigation_14}}} 0/0 0
{{{risk_15}}} {{{mitigation_15}}} 0/0 0
{{{risk_16}}} {{{mitigation_16}}} 0/0 0
{{{risk_17}}} {{{mitigation_17}}} 0/0 0
{{{risk_18}}} {{{mitigation_18}}} 0/0 0
{{{risk_19}}} {{{mitigation_19}}} 0/0 0
{{{risk_20}}} {{{mitigation_20}}} 0/0 0

Please ensure you are familiar with the Nottingham Hackspace Health and Safety Policy prior to undertaking this activity.

If you do have an accident or near-miss, please report it using our Near Miss and Accident reporting form.

Risk Matrix
Severity
5 1/5 2/5 3/5 4/5 5/5
4 1/4 2/4 3/4 4/4 5/4
3 1/3 2/3 3/3 4/3 5/3
2 1/2 2/2 3/2 4/2 5/2
1 1/1 2/1 3/1 4/1 5/1
1 2 3 4 5
Likelihood


Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=Team:CNC/Risk_Assessments/CNC_Routing&oldid=29136"