Hackspace 2.5/ToDo: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
|||
| Line 1: | Line 1: | ||
===Metalworking=== | ===Metalworking=== | ||
=== | ===Electrical=== | ||
* Hang lights ✅ (complete except grinding room + one in far corner) | |||
* Hang lights ( | * Install conduit ✅ | ||
* Install conduit | * Install trunking ✅ | ||
* Install trunking | * Pull cable ✅ | ||
* Pull cable | * Install temporary control box / switching solution ✅ | ||
* Install temporary control box / switching solution | * Install control box feed (10A RCBO from main board, PVC conduit) ✅ | ||
* Install control box feed (10A RCBO from main board, PVC conduit) | * Test & Inspection ✅ | ||
* Test & Inspection | * Remove last of temporary lighting solution ✅ | ||
* Remove last of temporary lighting solution | * 13A power circuit on near wall ✅ | ||
* 13A power circuit on dance studio wall ✅ | |||
* | |||
* Welding interlock (WIP) | * Welding interlock (WIP) | ||
* Heavy feed to interlock box (D63 - reuse from metalworking feed upstairs?) | * Heavy feed to interlock box (D63 - reuse from metalworking feed upstairs?) | ||
* Install welding sockets - will require them being removed from upstairs | * Install welding sockets - will require them being removed from upstairs | ||
* 16/3 | * Test & Inspection | ||
* Install small power circuit | * Make and install unistrut post for bandsaw socket | ||
* 16/3 Socket for bandsaw (SWA on tray from DB down post to RCD in small box, RCD to socket) | |||
* Complete traywork install | |||
* Make and install rest of unistrut posts | |||
* Install back wall small power circuit | |||
* Install posts small power circuit (routing???) | |||
* Corridor power circuit (PVC conduit) | |||
* Install power for compressor (seperate feed, or tacked on to the end of the corridor power circuit) | |||
* Test & Inspection, issue EIC | * Test & Inspection, issue EIC | ||
Non- | ====Blocked Tasks==== | ||
* Move door | * All of small grinding room | ||
* Hanging final light | |||
===Non-Electrical=== | |||
* Move door currently on grinding room to far end of room | |||
* Establish what else needs to be done to the grinding room before it's sensible to install electrics in there (finish walls, boxing, etc) | * Establish what else needs to be done to the grinding room before it's sensible to install electrics in there (finish walls, boxing, etc) | ||
* Move stuff out of the way (particularly the pallet of metal things and the Warco - eek.) | * Move stuff out of the way (particularly the pallet of metal things and the Warco - eek.) | ||
* Install curtains/other dividing to ensure that grinding dust is kept out of the rest of the area | * Install curtains/other dividing solution between welding quarter and the rest of the room to ensure that grinding dust is mostly kept out of the rest of the area | ||
* | * Design and install ventilation setup for welding | ||
* Finish ceiling in far corner of main space to allow final light to be hung | |||
* | |||
* Data cabling for NH-Tools | * Data cabling for NH-Tools | ||
* Move tools / benches etc into place! | * Move tools / benches etc into place! | ||
Revision as of 21:23, 26 January 2026
Metalworking
Electrical
- Hang lights ✅ (complete except grinding room + one in far corner)
- Install conduit ✅
- Install trunking ✅
- Pull cable ✅
- Install temporary control box / switching solution ✅
- Install control box feed (10A RCBO from main board, PVC conduit) ✅
- Test & Inspection ✅
- Remove last of temporary lighting solution ✅
- 13A power circuit on near wall ✅
- 13A power circuit on dance studio wall ✅
- Welding interlock (WIP)
- Heavy feed to interlock box (D63 - reuse from metalworking feed upstairs?)
- Install welding sockets - will require them being removed from upstairs
- Test & Inspection
- Make and install unistrut post for bandsaw socket
- 16/3 Socket for bandsaw (SWA on tray from DB down post to RCD in small box, RCD to socket)
- Complete traywork install
- Make and install rest of unistrut posts
- Install back wall small power circuit
- Install posts small power circuit (routing???)
- Corridor power circuit (PVC conduit)
- Install power for compressor (seperate feed, or tacked on to the end of the corridor power circuit)
- Test & Inspection, issue EIC
Blocked Tasks
- All of small grinding room
- Hanging final light
Non-Electrical
- Move door currently on grinding room to far end of room
- Establish what else needs to be done to the grinding room before it's sensible to install electrics in there (finish walls, boxing, etc)
- Move stuff out of the way (particularly the pallet of metal things and the Warco - eek.)
- Install curtains/other dividing solution between welding quarter and the rest of the room to ensure that grinding dust is mostly kept out of the rest of the area
- Design and install ventilation setup for welding
- Finish ceiling in far corner of main space to allow final light to be hung
- Data cabling for NH-Tools
- Move tools / benches etc into place!
Epilogue
- Christen the room by smashing a bottle of Lucozade on it's bow (step one, find its bow...)
- Remove all infra tools/supplies from Downstairs Members' Storage to Team Storage
- Consider fire door (opening inwards probably not acceptable?)
- Have Schneider DB disconnected and sell it on eBay
- Pub