DIY Laser/Pledge: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 14: Line 14:
'''Additional Goals'''
'''Additional Goals'''


Vacuum Table, holds the material down and draws the smoke through the cuts rather than across the material.
Vacuum Table, ''holds the material down and draws the smoke through the cuts rather than across the material.''
Cool bot, based upon the london design, monitors and reports issues with the water temperature.
 
Control system, an independent controller so that the system does not rely on a PC with a parallel port.
Cool bot, ''based upon the london design, monitors and reports issues with the water temperature.''
 
Control system, ''an independent controller so that the system does not rely on a PC with a parallel port.''


{| class="wikitable"
{| class="wikitable"

Revision as of 14:30, 13 November 2012

Pledge fund for the creation of a DIY open source laser cutter for Nottinghack

The initial target goal was for £1000 to create a copy of the build log laser cutter http://www.buildlog.net/blog/2011/02/buildlog-net-2-x-laser/

Stretch Goal 1 - £1250

Like any good kickstarter style project we need some additional goals, because of the speed that the first goal I'll say £1250 will get a 600x400 cutting area and a 60W laser

Stretch Goal 2 - £1500

The second goal would be to make it larger again. I think a 450x800 cutting area and an 80W laser would be a very admirable place to be.

Additional Goals

Vacuum Table, holds the material down and draws the smoke through the cuts rather than across the material.

Cool bot, based upon the london design, monitors and reports issues with the water temperature.

Control system, an independent controller so that the system does not rely on a PC with a parallel port.

Who How Much Paid Method Paid
James H £200
Martin £200
Kai £100
Steve £100
Dominic £200
Ric £50
David C £25
James F £125
Matthew G £100
Gareth H £150
Andy N £50
Joe £100
David H £100
Totals £1500