TIG welder: Difference between revisions
Created page with "Currently (May 2014) being comissioned. TIG (Tungsten Inert Gas) welding is particularly useful for aluminium, It used an electrode nozzle with a fixed (should be permanent, ..." |
|||
| Line 10: | Line 10: | ||
== TIG welder power supply == | == TIG welder power supply == | ||
A 63A plug and socket connection is used, with a | A 63A plug and socket connection is used, with a pushbutton on/off control station and no-volt release. | ||
RFID control of access will be installed shortly. | RFID control of access will be installed shortly. | ||
Revision as of 08:52, 19 May 2014
Currently (May 2014) being comissioned.
TIG (Tungsten Inert Gas) welding is particularly useful for aluminium, It used an electrode nozzle with a fixed (should be permanent, but they do wear) tungsten tip where a plasma 'flame' is created (started with a high-voltage / high freequency starter) and used to heat the filler wire and joint. The nozzle allows a flow of inert shield gas around the working area, reducing slag creation and (particularly important with aluminium) oxidation.
The TIG welder is a 'stick' welder - the electrode / nozzle is held in one hand, and the filler wire applied with the other.
TIG welder shield gas
TIG welder capacity and rating
TIG welder power supply
A 63A plug and socket connection is used, with a pushbutton on/off control station and no-volt release.
RFID control of access will be installed shortly.