Laser cutter: Difference between revisions
further information |
mNo edit summary |
||
| Line 24: | Line 24: | ||
| 50 Minutes || £2.50 | | 50 Minutes || £2.50 | ||
|- | |- | ||
| 1 hour || £3 | | 1 hour || £3.00 | ||
|} | |} | ||
Revision as of 19:05, 21 May 2014
 |
This page is a stub. You can help by expanding it! This page is included in the list of stub pages. |
A0 Laser Cutter
The Hackspace brought an A0 laser cutter from Just Add Sharks in early 2014, installed in May 2014. The project information related to that is available on the wiki.
Training
You need to have had an induction on the laser cutter to use it.
Costs and Usage
The A0 laser cutter costs £3 per hour; it will be charged per penny when hooked up to the RFID reader. For guidelines these are the costs over an hour, since larger jobs can take a long time especially if engraving.
| Time | Cost |
|---|---|
| 10 Minutes | £0.50 |
| 20 Minutes | £1.00 |
| 30 Minutes | £1.50 |
| 40 Minutes | £2.00 |
| 50 Minutes | £2.50 |
| 1 hour | £3.00 |
Red Laser Cutter
There is still some information on Inductions to sign up for an induction and for information on inductions while it is in the space. These however have been put on hold with the new laser being available. The old Materials info on what can be cut and suggested settings for this machine and will be updated.
Flickr Gallery
(Note: This doesn't seem to work and may be removed)