Power Usage
This page documents the typical power usage of the various tools and equipment in the hackspace. This will be more useful for things that remain powered all of the time.
The measurements were taken with a plug-in energy monitor similar to this: http://www.maplin.co.uk/p/13a-plug-in-energy-saving-monitor-n67fu
Ultimaker Original+ 3D Printer
Most of the power consumption is from the heated bed and hot end, during a print the power consumption should reduce as the heaters are cycled to maintain the set temperature.
- Idle: 2.5W
- Heated Bed: 170W
- Hot End: 45W
Vending Machine
Most of the power consumption is from the fluorescent lighting tube and chiller unit.
- Idle: 60W (without chiller in operation)