File:SLA 3D Printer Back Sticker.jpg

Size of this preview: 450 × 600 pixels. Other resolution: 1,536 × 2,048 pixels.

Original file ‎(3,024 × 4,032 pixels, file size: 11 MB, MIME type: image/jpeg)

Summary

SLA 3D Printer back sticker with some info.

Licensing

This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 License. Work can be shared and adapted; as long as attribution is give and adaptions have the same license.

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	19:15, 11 September 2019		3,024 × 4,032 (11 MB)	AndrewArmstrong (talk \| contribs)	SLA 3D Printer back sticker with some info.

You cannot overwrite this file.

File usage

The following page uses this file:

Anycubic Photon

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	samsung
Camera model	SM-G973F
Exposure time	1/25 sec (0.04)
F Number	f/1.5
ISO speed rating	640
Date and time of data generation	20:05, 11 September 2019
Lens focal length	4.32 mm
Width	4,032 px
Height	3,024 px
Orientation	Rotated 90° CCW
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	G973FXXS3ASH1
File change date and time	20:05, 11 September 2019
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.2
Date and time of digitizing	20:05, 11 September 2019
APEX shutter speed	0.04
APEX aperture	1.16
APEX exposure bias	0
Maximum land aperture	2.52 APEX (f/2.39)
Metering mode	Spot
Flash	Flash did not fire
Color space	sRGB
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Focal length in 35 mm film	26 mm
Scene capture type	Standard
Unique image ID	L12XLLD01VM