Sublimation Printer Epson ET-2862

From Nottinghack Wiki
Revision as of 20:48, 15 January 2025 by Timpart (talk | contribs) (New page)
Jump to navigation Jump to search
Sublimation Printer Epson ET-2862
[[|border|frameless|220px|center]]
Manufacturer Epson
Model ET-2862
AKA
Obtained purchased (2024)
Location Craft Room
Team Craft & Textiles
Induction Required No
Booking {{{booking}}}
Status Defunct
Tools:   all pageslistPower ToolsBroken tools     {{}}

The printer prints onto special sublimation paper or sublimation vinyl. The image can then be transferred by heat onto fabric (such as T-shirts) or special sublimation mugs. The ink sublimes from solid to gas and then infuses into the adjacent material and condenses again. If sublimation vinyl is used, the vinyl permanently adheres to the surface too.

Machine Setup

The printer is located in the Craft Room. It should appear on the network as EPSON ET-2860 SUBLIMATION It can be addressed as SUBLIMATION.local

If the printer has run out of ink, it is essential that only the special sublimation ink is used. Contact the Crafts team. Do not supply your own ink.

You do need to supply A4 sublimation paper or vinyl.

When preparing to print from a computer make sure the printer set up mirrors the text. High quality setting is recommended.

Hints

If using pure cotton to transfer onto, sublimation paper seems to transfer poorly. Vinyl works better.

Other fabrics, like polycotton, usually work successfully with paper.

Mugs. Special blank mugs for sublimation dyes are needed if you want to make a custom mug.

Heat presses for T-shirts and mugs are available in the Craft Room.

The Silhouette Cameo has a print and cut feature in its software which will neatly cut around printed images.