Wood lathe

Wood lathe

Manufacturer	Generic Chinese
Model	Similar to Charnwood 813
Serial Number	{{{serial}}}
AKA	{{{aka}}}
Obtained	Member Donation^[clarify]
Location	Dusty Area
Team	Woodworking
Induction Required	No
Booking	{{{booking}}}
Status	Defunct
Risk Assessment	Yes, see [[{{{riskassessment}}}\|the assessment]]
Tools: all pages • list • Power Tools • Broken tools {{}}

The current Wood Lathe is a Chinese model - the Charnwood 813 is a close match in terms of Specification.

The lathe has a mechanical speed control using a belt with variable diameter pulleys. It has a high maximum speed.

Safety Tips

Do not use this machine with materials that will generate silica dust. eg soapstone and other soft stones, sandstone, ceramics, gemstones A good reference on this subject https://ehs.princeton.edu/health-safety-the-campus-community/art-theater-safety/art-safety/sculpture

Tie back long hair, remove long sleeves, jewellery, etc or anything that might get caught in the lathe while you are using it.

The speed control must be set to a Low Speed before switch on. Once you've completed turning your part, the speed must be returned to a low speed before switching off.

Make sure that the chuck is tightened with tools before use.