DIY Laser/Pledge
Jump to navigation
Jump to search
Pledge fund for the creation of a DIY open source laser cutter for Nottinghack
The initial target goal was for £1000 to create a copy of the build log laser cutter http://www.buildlog.net/blog/2011/02/buildlog-net-2-x-laser/
Stretch Goal 1 - £1250
Like any good kickstarter style project we need some additional goals, because of the speed that the first goal I'll say £1250 will get a 600x400 cutting area and a 60W laser
Stretch Goal 2 - £1500
The second goal would be to make it larger again. I think a 450x800 cutting area and an 80W laser would be a very admirable place to be.
Additional Goals
- Vacuum Table, holds the material down and draws the smoke through the cuts rather than across the material.
- Cool bot, based upon the london design, monitors and reports issues with the water temperature.
- Control system, an independent controller so that the system does not rely on a PC with a parallel port.
- Free standing, Stable freestanding base, so we don't need a massive table to hold the massive machine
| Who | How Much | Paid | Method Paid | Help with Build? |
|---|---|---|---|---|
| James H | £200 | Yes | ||
| Martin | £200 | Remote | ||
| Kai | £100 | Yes | ||
| Steve | £100 | Yes | ||
| Dominic | £200 | Watch | ||
| Ric | £50 | |||
| David C | £25 | |||
| James F | £125 | |||
| Matthew G | £100 | Yes | ||
| Gareth H | £150 | |||
| Andy N | £50 | Yes | ||
| Joe | £100 | |||
| David H | £100 | Yes? | ||
| Wendy | £20 | Yes | ||
| Reprap Matt | £10 | Yes | ||
| Totals | £1530 |