DIY Laser/Frame

From Nottinghack Wiki
< DIY Laser
Revision as of 12:54, 17 December 2012 by James (talk | contribs) (Created page with "Frame size is dependent on [[{{BASEPAGENAME}}/XY Gantry|XY Gantry]] size, which is dependent on the bed size. == Extrusion == The Buildlog laser uses [http://uk.misumi-ec.co...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Frame size is dependent on XY Gantry size, which is dependent on the bed size.

Extrusion

The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.

The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=DIY_Laser/Frame&oldid=5281"