Team:Resources/2014-12-02

Present: Andrew, Lionel, Russell.

Notes

Followup:

• Brother label printer
  • Dominic recommended the real thing, cheaper ones are bad. Staples recommended.
• Card
  • Card safe brought (also to test online) and installed
  • Card has no money on - odd procedure? Will check in meeting/with James
• Makro Run
  • Brought 90% of list from last meeting - missing A3 paper and gloves
• Small clean gloves
  • Still to investigate
• Lathe Parts
  • Purchased
• Storage Boxes
  • David C has brought these (not including in budget - is capital equipment expenditure and covered by members)

New things to get:

• TIG welding gloves (approved) - Russell to sort
• Screw collection (approved) - Lionel has a good list and is working out what to buy
• Wood Glue on board - not needed, half of a big one left
• Members boxes on board - purchased

Lionel in meeting totalled up cost of things so far.

• Total things brought since 1st May
  • 1st May (RFID, Blades, Drills, blue roll) - 83.84
  • 3rd April (Blades, Drills, Marko run) - 117.97
  • 24th June (Arco; safety gear, mops and cleaning things, Swarfega) - 186.18
  • 9th July (Gloves) - 100.92
  • August - October (Bolts/Makro/Acetone) - 192.48
  • 11th November (Oxygen) - 20.99
  • 12th November (RFID cards) - 45 +45 for tons more (2 purchases done identical time!)
  • 12th November (Card, Amazon, Card safe) - 23.14
  • 19th November (Makro) - 196.44
  • 22nd November (Masks/Gas) - 38.99

Total: £1050.95

If £200/month (£1400) this is 349.05 "under the made up budget" but massively over some months, under on others.

Actions

• Check card money limit/time money is put on/etc - Andrew/Anyone
• Screw list/buying screws - Lionel
• Buying more A3 paper + brother labels from Staples - Anyone (low priority)
• Gloves - safety ones - Lionel/Russell
• TIG gloves - Russell