ARC welder

From Nottinghack Wiki
Revision as of 16:57, 8 June 2014 by Lwk (talk | contribs)
Jump to navigation Jump to search

The arc welder is the most basic king of welder, and uses an electrode 'stick' of filler wire. The arc is struck and controlled manually, requiring skill.

Different kinds of filler wire sticks are available with coatings to create a flux suitable for different metal combinations.

ARC welder capacity and rating

ARC welder power supply

A 32A plug and socket connection is used, with a pushbutton on/off control station and no-volt release. The supply is between phases (415V) allowing a greater welding capactity than previously (when a 13A / 240V supply was used).


[Category:Tools_and_Equipment]