Donkey Saw

From Nottinghack Wiki
Jump to navigation Jump to search

Cutting fluid nozzle placement

The correct placement for the cutting fluid nozzle is pointing down over the blade about 1-2 inch behind the work being cut.
The idea is to cool the blade and have it pull the fluid into the cut on the work
Donkey Saw Cooling 1.jpgDonkey Saw Cooling 2.jpg

Fluid should not be splashing into the drip tray in large quantity!
Donkey Saw incorrect cooling.jpg

When too much coolant gets splashed out into the catch tray, it can be topped up with a small quantity of fresh water. When the mix gets too diluted, it can be topped up with a strong mix (to allow ongoing dilution) of cutting fluid and water as part of the general maintenance process by the tools team.