File:Denford NovaLathe.zip

From Nottinghack Wiki
Revision as of 00:31, 9 January 2017 by Chriscain (talk | contribs) (Chriscain uploaded a new version of File:Denford NovaLathe.zip)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Denford_NovaLathe.zip(file size: 8 KB, MIME type: application/zip)

Warning: This file type may contain malicious code. By executing it, your system may be compromised.

Post Processor for Fusion 360 for the Denford Novaturn Looks to be all working OK in the simulator, will try on the lathe shortly Threads look a bit strange in the simulator (too thin) but everything else seems ok

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeDimensionsUserComment
current00:31, 9 January 2017 (8 KB)Chriscain (talk | contribs)Latest Version of the Post processor for fusion 360 All tested on the lathe for basic external toolpaths and works well Tested on the simulator and by inspection for interan and threads and looks ok but be careful if you are cutting threads or internally.
21:11, 27 December 2016 (8 KB)Chriscain (talk | contribs)Post Processor for Fusion 360 for the Denford Novaturn Looks to be all working OK in the simulator, will try on the lathe shortly Threads look a bit strange in the simulator (too thin) but everything else seems ok

The following page uses this file: