Difference between revisions of "Laser cutter/Materials"
Jump to navigation
Jump to search
(New page. Information on thin cardboard.) |
(No difference)
|
Revision as of 13:51, 10 October 2011
Introduction
This page is a list of materials that can be cut on the Nottinghack laser cutter, along with information on cutting speeds and power settings. Other useful information is also provided.
Thin Cardboard
Cutting Speed: 30 mm/s
Laser Current: 4mA
These values were found using with 160gsm black card. Other gsm values may require changes to the speed and power.