MIG welder

From Nottinghack Wiki
Revision as of 23:17, 7 February 2017 by Chriscain (talk | contribs)
Jump to navigation Jump to search

This is probably not the droid^H^H^H^H^HPage you are looking for. The Page you most likely want to find out about the hackspace Mig welder is https://wiki.nottinghack.org.uk/wiki/ESAB_Mig_Welder

MIG (Metal Inert Gas) welding is a useful general technique for most ferrous metal work, it uses an electrode nozzle which guides filler wire from a spool and the arc is between the filler wire and the pieces to be joined. The nozzle allows a flow of inert shield gas around the working area to reduce slag creation.

Some MIG welders can be converted for different kinds of wire, but this often involves changing the polarity of operation, so the Hackspace MIG welder is only used with a ferrous wire.

The MIG welder can be considered a 'single-handed' welder, as separate filler-wire sticks are not used, but it is often best to steady the nozzle using both hands, to keep control over the wire being fed from the spool.

Shield gas

Until larger cylinders are installed in the Hackspace, the MIG welder uses small disposable cylinders of gas, installed in/attached to the welder itself.

Gas bottle replacement log

Date Who Notes
06/06/15 Matt First Bottle

Capacity and rating

Power supply

A standard 13A plug is used, so this welder can be used with any of these sockets in the metalwork / welding area. The power is controlled by a switch / trigger in the nozzle, so a no-volt release supply is less important than with the other welders.