Difference between revisions of "Radial Arm Saw"
| Line 18: | Line 18: | ||
This saw is used for cross cutting (cutting across the grain). The angle and depth of cut are easily adjustable.This makes it useful when cutting tenon joints and lap joints. If you read the manual or watch certain videos you will see that it is cabable of other woodworking operations such as ripping ( cutting along the grain). '''At the Hackspace we consider these to be unsafe and must not be performed.''' | This saw is used for cross cutting (cutting across the grain). The angle and depth of cut are easily adjustable.This makes it useful when cutting tenon joints and lap joints. If you read the manual or watch certain videos you will see that it is cabable of other woodworking operations such as ripping ( cutting along the grain). '''At the Hackspace we consider these to be unsafe and must not be performed.''' | ||
| + | |||
| + | '''Switching On/Off''' The saw is plugged into a wall socket. There is a contactor beneath the saw table at the front. On the saw arm nearest you there is an on /off switch. This switch will only power the saw when the yellow safety key is in its slot and angled upwards. | ||
| + | |||
'''If you have not used this saw before; please do not use until I have completed this section.''' | '''If you have not used this saw before; please do not use until I have completed this section.''' | ||
Revision as of 12:31, 15 June 2022
 |
This page is a stub. You can help by expanding it! This page is included in the list of stub pages. (February 2019) |
| Radial Arm Saw | |
|---|---|
 | |
| Manufacturer | DeWalt |
| Model | Model 1251 |
| Location | Workshop |
| Team | Woodworking |
| Induction Required | No |
| Tools: all pages • list • Power Tools • Broken tools {{}} | |
The Radial Arm Saw is a DeWalt Model 1251.
More versatile version of the Benchtop Mitre Saw.
The Radial Arm Saw is located in the Workshop.
What it Does.
This saw is used for cross cutting (cutting across the grain). The angle and depth of cut are easily adjustable.This makes it useful when cutting tenon joints and lap joints. If you read the manual or watch certain videos you will see that it is cabable of other woodworking operations such as ripping ( cutting along the grain). At the Hackspace we consider these to be unsafe and must not be performed.
Switching On/Off The saw is plugged into a wall socket. There is a contactor beneath the saw table at the front. On the saw arm nearest you there is an on /off switch. This switch will only power the saw when the yellow safety key is in its slot and angled upwards.
If you have not used this saw before; please do not use until I have completed this section.