Talk:Superbox CNC Router Mesa and Touch Probe Pledge

From Nottinghack Wiki
Revision as of 18:59, 13 June 2023 by Lwk (talk | contribs) (Created page with "notes for later mesa wiring https://www.mycncuk.com/threads/7658-BoBbing-up-and-down-like-this <pre> The pins on the driver are :- 1 Step - 2 Step + 3 Dir - 4 Dir+ 5 Free...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

notes for later mesa wiring

https://www.mycncuk.com/threads/7658-BoBbing-up-and-down-like-this 

The pins on the driver are :-
1	Step -	
2	Step +	
3	Dir -	
4	Dir+	
5	Free -	_enable ?
6	Free +	
7	N.C.	
8	N.C.	
9	N.C.	
10	N.C.	
11	N.C.	
12	N.C.	
13	C pole	Timing
14	E pole	"
15	C pole	OH (overheat ?)
16	E pole	"
.
I am going to connect step+ and dir+ to +5v and use the step- and dir- to control the stepper. All the other pins will be unconnected. I am presuming that internal resistors in the driver will take care of the 'Free'. I have no idea what C pole and E pole means.
.
Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=Talk:Superbox_CNC_Router_Mesa_and_Touch_Probe_Pledge&oldid=27007"