DIY Laser/Frame
(Redirected from Project:DIY Laser/Frame)
 |
The information on this page is NOT current. It retained for historical or archival purposes only. (January 2013) |
Frame size is dependent on XY Gantry size, which is dependent on the bed size.
Extrusion
The Buildlog laser uses Misumi extrusion (HFS5-2020 and HFS5-2040), which is the same extrusion that the MakerSlide is based on, so very compatible.
The Blackhole laser uses Bosch Rexroth extrusion with glued on v-rails.