Raspberry Pi Small LCD: Difference between revisions

From Nottinghack Wiki
Jump to navigation Jump to search
Created page with "I was lucky enough to get my Raspberry Pi quite early and I've got quite a few project ideas but the first one is to create a small user interface on a cheap LCD monitor. I ..."
 
Elsen (talk | contribs)
430 edits
No edit summary
 
(5 intermediate revisions by one other user not shown)
Line 1: Line 1:
I was lucky enough to get my [[Raspberry Pi]] quite early and I've got quite a few project ideas but the first one is to create a small user interface on a cheap LCD monitor.
I was lucky enough to get my [[Raspberry Pi]] quite early and I've got quite a few project ideas but the first one is to create a small user interface on a cheap LCD monitor.
http://www.ebay.co.uk/itm/120932197731?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_704wt_1189


I got this second-hand 5" LCD monitor from an ebay seller for £5.50 (plus £4.50 postage so a tenner in total). It's a CCTV monitor for inside a bus or taxi. I tracked it down to the manufacturer's website at http://www.lookcctv.com/show_spares.php?id=2 The unit came with a single 8-pin mini-DIN plug as the only external connector but the seller gave me a pinout diagram so I was able to work out the what went where. I decided to cut the original plug off and solder my own sockets - the alternative was to destroy a perfectly good Apple Mac 3-way serial port hub - my only other source of an 8-pin Mini-DIN socket.
I got this second-hand 5" LCD monitor from an ebay seller for £5.50 (plus £4.50 postage so a tenner in total). It's a CCTV monitor for inside a bus or taxi. I tracked it down to the manufacturer's website at http://www.lookcctv.com/show_spares.php?id=2 The unit came with a single 8-pin mini-DIN plug as the only external connector but the seller gave me a pinout diagram so I was able to work out the what went where. I decided to cut the original plug off and solder my own sockets - the alternative was to destroy a perfectly good Apple Mac 3-way serial port hub - my only other source of an 8-pin Mini-DIN socket.


This morning I spent a good few hours working out how to connect the power, a video signal, and finally an audio signal. It took some doing as the various ground signals didn't seem to make sense and I got horribly confused and a bit miserable when it wouldn't work first time!
Photos: https://plus.google.com/photos/101627167067307203883/albums/5759903374126361649
 
[[File:Raspberry Pi Small LCD - 001.png|none|300px]]
The unit has a slightly scratched screen - no big deal. There's buttons for some menu control and audio volume and what seems to be IR remote!
[[File:Raspberry Pi Small LCD - 002.png|none|300px]]
12v, 8W, PAL/NTSC
[[File:Raspberry Pi Small LCD - 003.png|none|300px]]
Inside, the cable breaks out to a row of 8 solder points
[[File:Raspberry Pi Small LCD - 004.png|none|300px]]
[[File:Raspberry Pi Small LCD - 005.png|none|300px]]
So the Mini-DIN has 8 pins but these are quite rare apart from Apple Mac serial ports.
[[File:Raspberry Pi Small LCD - 006.png|none|300px]]
Here's the pinout provided by the seller - doesn't mention the audio or problematic ground for the two video signals.
[[File:Raspberry Pi Small LCD - 007.png|none|300px]]
So I hacked off the plug and set about fitting some proper socket connectors for RCA composite video, 3.5 mm TRS audio and 6mm barrel 12v power.
[[File:Raspberry Pi Small LCD - 008.png|none|300px]]
Video socket soldering setup - heatshrink in place - the little coax video sub-cable from the LCD was tiny!
[[File:Raspberry Pi Small LCD - 009.png|none|300px]]
Using helping hands - outer braid gathered to one side - ready for tinning.
[[File:Raspberry Pi Small LCD - 010.png|none|300px]]
Fitting barrel power socket (+ve tip always!)
[[File:Raspberry Pi Small LCD - 011.png|none|300px]]
Success with the power! Using a bench power supply.
[[File:Raspberry Pi Small LCD - 012.png|none|300px]]
The LCD's own menus can be navigated with the buttons - took some getting used to.
[[File:Raspberry Pi Small LCD - 013.png|none|300px]]
After a few failed attempts I finally worked out the wiring for the video and achieved my goal - the Pi Debian login presented on my £10 LCD!
[[File:Raspberry Pi Small LCD - 014.png|none|300px]]
And with the Pi logo! Here the LCD is auto selecting the NTSC signal. Nice feature.
[[File:Raspberry Pi Small LCD - 015.png|none|300px]]
My hand in shot for scale.
[[File:Raspberry Pi Small LCD - 016.png|none|300px]]
And X in all its glory! It's obviously too small to use the console or the desktop as is and that's fine as my plans for this are as a custom user interface with quite large text and buttons.
[[File:Raspberry Pi Small LCD - 017.png|none|300px]]
OK, all done - three usable sockets instead of one unusable non-standard plug! There's no photos of the audio :D but I can assure you it works well. Only mono but I don't think that matters on the tiny piezoelectric speaker!
[[Category:Tools_and_Equipment]]

Latest revision as of 13:57, 12 December 2014

I was lucky enough to get my Raspberry Pi quite early and I've got quite a few project ideas but the first one is to create a small user interface on a cheap LCD monitor.


http://www.ebay.co.uk/itm/120932197731?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649#ht_704wt_1189

I got this second-hand 5" LCD monitor from an ebay seller for £5.50 (plus £4.50 postage so a tenner in total). It's a CCTV monitor for inside a bus or taxi. I tracked it down to the manufacturer's website at http://www.lookcctv.com/show_spares.php?id=2 The unit came with a single 8-pin mini-DIN plug as the only external connector but the seller gave me a pinout diagram so I was able to work out the what went where. I decided to cut the original plug off and solder my own sockets - the alternative was to destroy a perfectly good Apple Mac 3-way serial port hub - my only other source of an 8-pin Mini-DIN socket.

Photos: https://plus.google.com/photos/101627167067307203883/albums/5759903374126361649

The unit has a slightly scratched screen - no big deal. There's buttons for some menu control and audio volume and what seems to be IR remote!

12v, 8W, PAL/NTSC

Inside, the cable breaks out to a row of 8 solder points

So the Mini-DIN has 8 pins but these are quite rare apart from Apple Mac serial ports.

Here's the pinout provided by the seller - doesn't mention the audio or problematic ground for the two video signals.

So I hacked off the plug and set about fitting some proper socket connectors for RCA composite video, 3.5 mm TRS audio and 6mm barrel 12v power.

Video socket soldering setup - heatshrink in place - the little coax video sub-cable from the LCD was tiny!

Using helping hands - outer braid gathered to one side - ready for tinning.

Fitting barrel power socket (+ve tip always!)

Success with the power! Using a bench power supply.

The LCD's own menus can be navigated with the buttons - took some getting used to.

After a few failed attempts I finally worked out the wiring for the video and achieved my goal - the Pi Debian login presented on my £10 LCD!

And with the Pi logo! Here the LCD is auto selecting the NTSC signal. Nice feature.

My hand in shot for scale.

And X in all its glory! It's obviously too small to use the console or the desktop as is and that's fine as my plans for this are as a custom user interface with quite large text and buttons.

OK, all done - three usable sockets instead of one unusable non-standard plug! There's no photos of the audio :D but I can assure you it works well. Only mono but I don't think that matters on the tiny piezoelectric speaker!

Retrieved from "https://wiki.nottinghack.org.uk/index.php?title=Raspberry_Pi_Small_LCD&oldid=10051"